20626
Universal Remote
Instruction Manual
Introduction
Congratulations.on.your.purchase.of.this.20626.Universal.Remote.
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.
remote.controls.available.today..With.the.20626.juggling.multiple.
remote.controls.is.a.thing.of.the.past!.Your.20626.Universal.Remote.
controls.up.to.4.devices,.including.the.most.popular.brands.of.TV,.
VCR,.DVD,.SAT,.CBL,.and.audio.equipment..
Note:.Some.functions.from.your.original.remote.may.not.be.
controlled.by.the.20626.remote..Use.the.original.remote,.if.
available,.to.control.such.functions..Sometimes.buttons.other.than.
described.in.these.instructions.may.actually.perform.the.function..
For.example,.the.CHAN.and.VOL.buttons.might.be.used.to.navigate.
through.menu.choices..We.recommend.you.experiment.with.the.
remote.to.identify.if.such.situations.pertain.to.your.equipment..
The.20626.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.
gives.you.total.control—at.the.touch.of.your.fingertips!
3
Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
Note:.The.Record.button.must.be.pressed.TWICE.to.record.from.
your.VCR..For.some.brands.of.VCRs,.you.might.need.to.press.the.
Record.button.once,.then.press.it.again.for.three.seconds..Some.
buttons.on.the.remote.might.have.functions.that.are.referred.to.
by.different.names.on.the.device.you.are.controlling..E.G...LAST.
may.be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.
differences.depend.on.the.brand.and.model.of.your.product..Also,.
this.remote.can.only.operate.features.that.exist.on.your.product..
E.G.,.your.product.must.have.LAST.ability.for.the.LAST.button.to.
operate.this.feature.
4
Button Functions, cont.
1.
2.
3.
4.
5.
6.
7.
ON-OFF: Turns.device.On.or.Off.
Red Indicator:.Lights.when.any.button.is.pressed.
TV, DVD, CBL/SAT, DVR/AUX:.Selects.product.to.be.operated..
MUTE: Turns.off.the.TV.sound.while.the.picture.remains..
VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.normally.the.TV.
UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.
MENU: brings.up.the.DVD.disc.Menu.screen..Use.with.the.UP,.DOWN,.LEFT &.
RIGHT navigation.buttons.
5.
8.
INPUT Selects.the.video.inputs.of.your.TV.if.equipped.with.that.feature.
ENTER:.Used.after.direct.channel.number.entry.to.immediately.change.to.the.
selected.channel.
9.
NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.products.require.
Enter.to.be.pressed.after.channel.selection.
10.
11.
(•).Used.for.digital.channels,.e.g..2.3.
RECORD, PLAY, STOP, REW, FF, PAUSE:...VCR.control.buttons.operate.your.VCR.even.
when.the.remote.is.set.to.operate.the.TV..Also.operates.DVD.Scan.-/+.
12.
TV/VCR/INPUT: Operates.the.same.as.the.TV/VCR.or.antenna.keys.on.your.original.
remotes.
13.
14.
15.
16.
17.
18.
INFO: Displays.on-screen.channel.information,.etc.
GUIDE: Displays.satellite.or.cable.on-screen.program.guide.
EXIT: Exits.On-Screen.Menus.and/or.Returns.to.previous.On-Screen.selection.
LAST: Returns.to.the.previously.selected.channel,.or.DVD.repeat.toggle..
OK: Selects.menu.items.for.the.device.you.are.controlling.
CHANNEL UP/DOWN:.Changes.the.channels..Also.controls.DVD/CD.CHAPTER.+/-.
track.selection.i.e..DVD/CD.Track.Skip.Up/Down..Note.the.VCR buttons.also.control.
DVD.when.in.DVD.Mode.
19.
20.
SETUP: Used.for.setting.up.your.remote.
BACKLIGHT: Backlighting.On/Off.
ꢀ
Setup
Battery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.tab.and.lift.the.
cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.the.battery.
case,.then.insert.2.AAA.alkaline.batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.are.depressed.
more.than.30.seconds..This.will.save.your.batteries.should.your.
remote.get.stuck.in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
You.will.have.up.to.10.minutes.to.change.the.batteries.in.your.
remote.without.losing.codes.you.have.programmed..However,.do.
not.press.any.buttons.until.batteries.are.installed.in.the.remote..If.
buttons.are.pressed.without.batteries.in.the.remote,.all.codes.will.
be.lost..
Power-On Default
The.remote.powers.on.in.TV.mode.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.
the.remote.using.the.code.for.your.brand.of.product,.from.the.code.
tables.(on.separate.sheet),.or.you.can.search.through.the.library.of.
codes.until.you.find.a.code.that.works.for.your.product.
Please.refer.to.“Programming.with.Code.Search”.on.page.8.for.
more.information.on.using.the.code.search.feature.to.learn.how.to.
search.through.the.library.of.codes.for.your.products.
NOTE:.You.can.store.any.kind.of.code.under.any.mode.(except.TV)..
I.E..you.can.store.a.VCR.code.under.the.CBL button,.or.a.SAT.code.
under.the.DVD button,.etc..However,.you.can.only.store.TV.codes.
under.the.TV button.
6
Direct Code Entry
1.... Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on,.then.release.the SETUP.button.
2.... Press.and.release.the.desired.mode.button.(TV, DVD,.etc.)..The.
red.indicator.blinks,.then.stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..
Note:.after.a.valid.code.entry,.the.red.indicator.turns.off...For.
an.invalid.code,.the.red.indicator.flashes.
4.. With.your.device.on,.press CHANNEL UP..If.the.device.
responds,.no.further.programming.is.required..Note:.If.some.
buttons.do.not.operate.your.equipment,.try.one.of.the.other.
codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.later.
Device.
.................................Device.stored.........
.........Code
TV. ..................................................TV
DVD. .
CBL/SAT
DVR/AUX
7
Code Search
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.
for.your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.
code.by.following.these.steps.
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.be.controlled.
2.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on,.then.release.the.SETUP button.
3... Press.and.quickly.release.the.desired.mode.button.(TV,.DVD,.
etc.)..The.red.indicator.blinks.off.once.
4.. Press.the.CHANNEL UP.button.repeatedly.(up.to.300.times).
until.the.device.to.be.controlled.changes.channel..The.red.
indicator.blinks.off.with.each.button.press...If.you.accidentally.
overshoot.the.code.required,.press.the.CHANNEL DOWN
button.to.backtrack.through.the.library.until.the.device.
changes.channel..Pressing.CHANNEL UP.changes.direction.to.
forward.again..
ꢀ.. Press.and.release.ENTER to.install.the.code..
Most.users.will.store.DVD.codes.under.the.DVD button,.Cable.
codes.under.CABLE,.etc..If.(for.example).you.want.to.store.a.DVD.
code.under.CABLE,.first.follow.the.procedure.for.Direct.Code.Entry.
(previous.page).and.press.CABLE in.step.2.of.Direct.Code.Entry,.
then.enter.ANY.DVD.code.in.step.3.of.Direct.Code.Entry..Then.follow.
the.steps.for.Code.Search.on.the.previous.page..Note:..If.the.device.
does.not.have.a CHANNEL UP.button,.use.PLAY (DVD.only).or.ON-
OFF instead..Code.Search.starts.from.the.currently.stored.4.digit.
number.under.that.mode.
8
Code Identification Feature
The.Code.Identification.Feature.allows.you.to.identify.the.three.digit.
library.code.stored.under.your.device.key..For.example,.if.you.want.
to.find.out.what.4.digit.code.is.stored.under.your.TV.device.key,.
follow.the.six.steps.below:
1.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on..Release.the SETUP.button.
2.. Press.and.release.the.desired.mode.button.(TV,.DVD,.etc.)..The.
red.indicator.blinks,.then.stays.lit...
3.. Press.and.release.the.SETUP.button..The.red.indicator.blinks.
off.
4.. To.find.the.first.digit.for.the.code.stored.under.the.mode.key.
pressed.in.step.2,.press.each.numeric.key.from.0-9.in.turn..
When.the.red.indicator.blinks.off.the.number.you.pressed.is.
the.first.digit.for.the.code.you.are.searching.for.
ꢀ.. To.find.the.second.digit,.repeat.step.4,.this.time.when.the.red.
indicator.blinks.off.this.is.the.second.digit.
6.. Repeat.step.4.to.find.the.third.and.fourth.digits.
9
Setup, cont.
Programming Combo Device Codes
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).will.
require.you.to.set.up.two.different.Mode.buttons.to.control.both.
parts.of.the.Combo.device..For.example,.if.you.have.a.TV/DVD.
Combo,.you.might.need.to.set.up.one.code.under.the.TV button.to.
control.the.TV.part.AND.a.separate.code.(under.any.other.Mode.
button).to.control.the.DVD.part.
Controlling Combo Devices
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).have.
separate.buttons.on.the.original.remote.to.select.the.part.of.the.
Combo.device.to.be.controlled..For.example,.if.your.Combo.device.
is.a.DVD/VCR.then.its.original.remote.might.have.separate.DVD.
and.VCR.buttons.for.selection.of.the.Combo.part.you.would.control..
The.equivalent.button.functions.can.be.found.on.your.new.remote.
by.using.the.device.Mode.and.SETUP buttons...
Referring.to.“Programming.with.Code.Search”.on.page.8,.setup.
a.device.Mode.(e.g..DVD).with.the.correct.code.for.your.Combo.
device..Assuming.the.DVD/VCR.Combo.device.is.the.example.and.
its.code.is.programmed.under.DVD Mode,.press.and.hold.the.DVD.
Mode.button.for.more.than.one.second.to.send.the.DVD.button.
command..To.send.the.VCR.button.command,.quickly.press.and.
release.the.SETUP button.followed.by.pressing.and.releasing.
the.DVD.Mode.button..This.method.can.be.applied.similarly.to.
all.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).and.is.
available.for.all.Modes..Note.this.feature.is.not.supported.by.all.
codes..
Controlling Devices Requiring Separate Power On and Off
Buttons
Some.devices.(e.g..certain.RCA.TVs).require.separate.Power.On.and.
Power.Off.buttons.to.turn.the.device.on.and.off..The.equivalent.
button.functions.can.be.found.on.your.new.remote.by.using.the.
device.Mode.and.ON-OFF buttons..Referring.to.“Programming.with.
Code.Search”.on.page.8,.setup.a.device.Mode.(e.g..TV).with.the.
correct.code.for.your.device..
Assuming.a.TV.device.is.the.example.and.its.code.is.programmed.
under.TV.Mode,.to.turn.your.TV.on,.press.and.hold.the.TV.Mode.
button.for.more.than.one.second.to.transmit.the.Power.On.button.
command..
10
Setup, cont.
Controlling Devices Requiring Separate Power On and Off
Buttons, cont.
To.turn.the.TV.off,.press.and.release.the.ON-OFF.button.to.transmit.
the.Power.Off.button.command..This.method.can.be.applied.
similarly.to.any.device.and.is.available.for.all.Modes..Note.this.
feature.is.not.supported.by.all.codes..
VCR/DVD/DVR Punch-Through Feature
This.remote.allows.the.6.VCR.transport.buttons.(i.e..PLAY,.PAUSE,.
STOP,.FF,.REWIND,.and.REC).to.Punch-Through.control.from.any.
Mode.programmed.with.TV,.SAT.or.Cable.codes.to.the.last.VCR,.
DVD.or.DVR.programmed.Mode.you.used...Normally.other.types.
of.remotes.only.punch-through.(from.another.Mode).on.the.6.VCR.
buttons.to.the.device.programmed.under.the.VCR Mode.button..
This.is.not.much.use.if.you.are.using.a.DVD.programmed.under.a.
Mode.other.than.VCR..For.example,.if.you.have.3.DVD,.VCR.or.DVR.
devices.programmed.into.this.remote,.the.last.one.you.accessed.
on.the.remote.will.be.the.one.that.has.control.of.the.6.VCR.
transport.buttons.when.in.any.other.Mode...This.feature.will.not.
operate.if.the.programmed.TV,.SAT.or.Cable.code.has.its.own.VCR.
transport.button.control.e.g..a.TV.Combo,.SAT/PVR,.etc.
Volume/Mute Control and Punch-Through Feature
This.remote.lets.you.select.which.device.Mode.controls.your.
Volume/Mute.buttons..The.remote.is.initially.set.(factory.default).
for.all.device.Modes.programmed.with.“Visual”.codes.(e.g..TV,.VCR,.
DVD,.DVR,.SAT.&.CABLE).and.“Audio”.codes.(e.g..CD.&.AUDIO).to.
use.their.own.Volume/Mute.control.if.present..If.the.programmed.
“Visual”.code.has.no.Volume/Mute.operation.of.its.own.then.those.
buttons.will.punch-through.control.to.the.TV.Mode.device.without.
needing.to.change.to TV.Mode..Please.refer.to.the.next.page.for.
more.information.
.
11
Setup, cont.
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/Mute buttons will do
nothing.
Setting ALL Volume/Mute Control to any one Mode
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.
chosen.Mode.for.Volume/Mute.button.control.without.the.needing.
to.change.to.that.Mode.
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.
on,.then.release.the.button.
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.
off,.then.release.the.button.
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.).for.
Volume/Mute.control,.the.red.indicator.blinks.then.stays.on.
4... Press.and.release.the.MUTE button.and.the.red.indicator.turns.
off..The.red.indicator.will.blink.rapidly.for.three.seconds.if.the.
Mode.you.have.selected.has.no.Volume/Mute.control..
ꢀ... All.other.Modes.will.now.punch-through.to.your.chosen.Mode.
for.Volume/Mute.control.
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-
through.to.the.respective.Modes.you.have.chosen.for.Volume/
Mute.control.
Setting any Mode to use its own Volume/Mute Control
This.routine.can.set.any.Mode.to.use.only.its.own.Volume/Mute.
control..Note.-.If.your.chosen.Mode.has.no.Volume/Mute.functions.
of.its.own.then.the.Volume/Mute.buttons.will.do.nothing.
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.
on,.then.release.the.button.
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.
off,.then.release.the.button.
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.),.the.
red.indicator.blinks.then.stays.on.
4... Press.and.release.the.VOLUME-.(Down).button,.the.red.
indicator.blinks.then.stays.on.
ꢀ... Press.and.release.the.MUTE button.and.the.red.indicator.turns.
off..
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-
through.to.the.respective.Modes.you.have.chosen.for.Volume/
Mute.control.
Troubleshooting
Remote does not operate your product.
•.. Press.the.mode.button.of.the.product.you.want.to.control.
•.. Program.the.remote.with.a.new.code.
•.. Install.new.batteries..(You.might.have.to.reprogram.your.remote.
after.installing.new.batteries.)
•.. Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your product.
•.. Program.remote.with.a.new.code.
•.. Remote.may.not.be.able.to.operate.all.features.of.your.product.
or.button.names.might.be.different.than.your.product.
Red Indicator blinks after you program a product code.
•.. Remote.did.not.accept.the.code.
•.. Try.to.program.the.code.again.or.try.a.different.code.
If.you.lose.your.codes.or.programming.instructions,.you.can.find.
them.available.on.our.website:.www.jascoproducts.com
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.to.be.free.from.
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.
date.of.consumer.purchase...This.warranty.is.limited.to.the.repair.
or.replacement.of.this.product.only.and.does.not.extend.to.
consequential.or.incidental.damage.to.other.products.that.may.be.
used.with.this.unit...This.warranty.is.in.lieu.of.all.other.warranties.
express.or.implied...Some.states.do.not.allow.limitations.on.how.
long.an.implied.warranty.lasts.or.permit.the.exclusion.or.limitation.
of.incidental.or.consequential.damages,.so.the.above.limitations.
may.not.apply.to.you...This.warranty.gives.you.specific.rights,.and.
you.may.also.have.other.rights.which.vary.from.state.to.state....If.
unit.should.prove.defective.within.the.warranty.period,.return.
prepaid.with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114
14
20626
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114
Made.in.China. ..............................
1ꢀ
20626-04/09
|
Indesit Dishwasher IDF125 User Manual
Indesit Washer IWC 61651 User Manual
Insignia Car Satellite TV System NS 22E400NA14 User Manual
Jotul Stove F 500 User Manual
Jura Capresso Coffeemaker 68191 User Manual
JVC Speaker RV B99 User Manual
Kawasaki Motorized Toy Car R8126 User Manual
Kenwood Kitchen Grill Snack Maker User Manual
Kodak Digital Photo Frame P76 User Manual
Kompernass Indoor Furnishings KH 4102 User Manual