Oregon Scientific Clock RMR802 User Manual

About Oregon Scientific ...........................................7  
EU-Declaration of Conformity ..................................7  
FCC Statement...........................................................8  
Declaration of Conformity........................................8  
Solar Clock with Indoor / Outdoor  
Temperature  
Model:RMR802 / RMR802A  
USER MANUAL  
CONTENTS  
Overview .....................................................................2  
Front View ..............................................................2  
Back View ..............................................................2  
Remote Sensor .......................................................3  
Getting Started ...........................................................3  
Solar Panel..............................................................3  
Insert Batteries........................................................3  
Remote Sensor...........................................................3  
Sensor Data Transmission......................................4  
Clock ...........................................................................4  
Clock Reception......................................................4  
Manually Set Clock .................................................5  
Temperature ...............................................................5  
Ice Warning.............................................................6  
Reset...........................................................................6  
Precautions................................................................6  
Specifications ............................................................7  
1
 
1. RESET: Reset unit to default settings  
INSERT BATTERIES  
2. EU / UK: Select the nearest radio signal (RMR802  
1. Remove the battery compartment.  
2. Insert the batteries, matching the polarities.  
3. Press RESET after each battery change.  
only)  
3. °C / °F: Select temperature unit  
REMOTE SENSOR  
MEANING  
LOCATION  
Clock / alarm  
Main unit batteries low  
Sensor batteries low  
2
Outdoor temperature  
1
4
5
REMOTE SENSOR  
3
The main unit can collect data from up to 3 sensors.  
To set up the sensor:  
1. Open the battery compartment.  
2. Insert the battery, matching the polarities.  
3. Select a channel then press RESET.  
4. Close the battery door.  
1. LED status indicator  
2. Wall mount hole  
3. Battery compartment  
4. RESET hole  
5. Place the sensor within 30 m (98 ft) of the main unit  
using the table stand or wall mount.  
5. CHANNEL switch  
TIP Ideal placements for the sensor would be in any  
location on the exterior of the home at a height of not  
more than 1.5 m (5 ft) and which can shield it from direct  
sunlight or wet conditions for an accurate reading.  
GETTING STARTED  
SOLAR PANEL  
The solar panel is an energy saving feature, which is an  
environmentally friendly way to provide additional power  
to the main unit and prolongs battery life. However, it  
cannot replace battery power entirely.  
3
 
The sensor reception icon in the remote sensor area  
shows the status:  
ICON  
DESCRIPTION  
Main unit is searching for  
sensor(s).  
A channel has been found.  
The sensor cannot be  
found.  
1.5 m (5 ft)  
TIP The transmission range may vary depending on  
many factors. You may need to experiment with various  
locations to get the best results.  
NOTE Use alkaline batteries for longer usage and  
consumer grade lithium batteries in temperatures below  
freezing.  
CLOCK  
CLOCK RECEPTION  
This product is designed to synchronize its clock  
automatically with a clock signal.  
SENSOR DATA TRANSMISSION  
To search for a sensor:  
RMR802:  
Press and hold + MODE.  
Slide EU / UK to select the signal received.  
EU: DCF-77 signal: within 1500 km (932 miles) of  
Frankfurt, Germany.  
UK: MSF-60 signal: within 1500 km (932 miles) of  
Anthorn, England.  
4
 
RMR802A:  
WWVB-60 signal: within 3200km (2000 miles) of  
Fort Collins Colorado.  
To enable / disable signal reception:  
RMR802: Time zone offset sets the clock +/- 23 hours  
from the received clock signal time.  
RMR802A: Select the time zone: (P) Pacific, (E) Eastern,  
(C) Central or (M) Mountain.  
Press and hold  
reception.  
to enable or  
to disable signal  
NOTE The language options are English (E), German  
(D), French (F), Italian (I), Spanish (S) and Russian  
(R).  
NOTE Reception takes 2-10 minutes. If the signal is  
weak, it can take up to 24 hours to get a valid signal.If  
signal reception is unsuccessful, place your unit next  
To select display mode:  
to a window, press and hold  
search.  
to force another signal  
Press MODE to choose between clock with seconds,  
clock with weekday or calendar.  
Clock signal reception indicator:  
TEMPERATURE  
STRONG  
SIGNAL  
WEAK / NO  
SIGNAL  
To toggle temperature unit:  
Press °C / °F.  
To toggle between each outdoor sensor’s readings:  
Press repeatedly.  
OR  
MANUALLY SET CLOCK  
Press and hold + MEM for 2 seconds to initiate auto  
toggle of outdoor channels.  
To set the clock manually, disable the signal reception  
first.  
To end press  
.
1. Press and hold MODE.  
To toggle between current, minimum and maximum  
records:  
2. Press  
or  
to change the settings.  
3. Press MODE to confirm.  
Press MEM repeatedly.  
To clear the records:  
Press and hold MEM.  
4. The settings order is: time zone, 12/24 hr format,  
hour, minute, year, calendar mode (day – month /  
month – day), month, day and language.  
5
 
When disposing of this product, ensure it is collected  
separately for special treatment and not as normal  
household waste.  
ICE WARNING  
If the sensor falls between 3°C to -2 °C (37°F to 28°F),  
the green LED indicator will flash, and will stop flashing  
once the temperature is out of this range.  
Placement of this product on certain types of  
wood may result in damage to its finish for which  
Oregon Scientific will not be responsible. Consult  
the furniture manufacturer’s care instructions for  
information.  
NOTE As ice alert is only applicable to channel 1,  
to prevent flashing of LED, select channel 2 or 3 on  
outdoor sensor.  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
RESET  
Do not dispose old batteries as unsorted municipal  
waste. Collection of such waste separately for  
special treatment is necessary.  
Press RESET to return to the default settings.  
PRECAUTIONS  
Please note that some units are equipped with  
a battery safety strip. Remove the strip from the  
battery compartment before first use.  
Do not subject the unit to excessive force, shock,  
dust, temperature or humidity.  
Do not cover the ventilation holes with any items  
such as newspapers, curtains etc.  
NOTE The technical specifications for this product and  
the contents of the user manual are subject to change  
without notice.  
Do not immerse the unit in water. If you spill liquid  
over it, dry it immediately with a soft, lint-free cloth.  
Do not clean the unit with abrasive or corrosive  
materials.  
NOTE Features and accessories will not be available  
in all countries. For more information, please contact  
your local retailer.  
Do not tamper with the unit’s internal components.  
This invalidates the warranty.  
Only use fresh batteries. Do not mix new and old  
batteries.  
Images shown in this manual may differ from the  
actual display.  
6
 
SPECIFICATIONS  
ABOUT OREGON SCIENTIFIC  
more about Oregon Scientific products.  
TYPE  
DESCRIPTION  
MAIN UNIT  
If you’re in the US and would like to contact our  
Customer Care department directly, please visit: www2.  
oregonscientific.com/service/support  
75 x 33 x 120 mm  
(2.95 x 1.30 x 4.72 in)  
L x W x H  
Weight  
112 g (3.95 oz)  
without battery  
For international inquiries, please visit: www2.  
oregonscientific.com/about/international  
-5°C to 50°C  
(23°F to 122°F)  
Temperature range  
Signal frequency  
Power  
EU-DECLARATION OF CONFORMITY  
433 MHz  
Hereby, Oregon Scientific, declares that this Solar  
Clock with Indoor / Outdoor Temperature (Model:  
RMR802 / RMR802A) is in compliance with the essential  
requirements and other relevant provisions of Directive  
1999/5/EC. A copy of the signed and dated Declaration  
of Conformity is available on request via our Oregon  
Scientific Customer Service.  
2 x UM-4 (AAA) 1.5 V  
batteries  
REMOTE UNIT (THN132N)  
96 x 50 x 22 mm  
(3.78 x 1.97 x 0.87 in)  
L x W x H  
Weight  
62g (2.22 ounces)  
Transmission range  
30m (98 ft) unobstructed  
-20°C to 60°C  
(-4°F to 140°F)  
Temperature range  
Power  
1 x UM-3 (AA) 1.5 V  
batteries  
COUNTRIES RTTE APPROVAL COMPLIED  
All EC countries,Switzerland CH  
and Norway  
N
7
 
Consult the dealer or an experienced radio / TV  
technician for help.  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
DECLARATION OF CONFORMITY  
The following information is not to be used as contact  
for support or sales. Please visit our website at www2.  
oregonscientific.com/service for all enquiries.  
WARNING Changes or modifications not expressly  
approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
We  
Name:  
Oregon Scientific, Inc.  
19861 SW 95th Ave.,Tualatin,  
Oregon 97062 USA  
Address:  
NOTE This equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against  
harmful interference in a residential installation.  
Telephone No.: 1-800-853-8883  
declare that the product  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference  
by one or more of the following measures:  
Product No.:  
RMR802 / RMR802A  
Product Name: Solar Clock with Indoor / Outdoor  
Temperature  
Manufacturer:  
Address:  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,Phase 1,41  
Man Yue St., Hung Hom, Kowloon,  
Hong Kong  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: 1) This device  
may not cause harmful interference. 2) This device must  
accept any interference received, including interference  
that may cause undesired operation.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
8
 
© 2009 Oregon Scientific. All rights reserved.  
P/N: 300102249-00001-10  
 
Solar Clock with Indoor / Outdoor Temperature  
Model:RMR802 / RMR802A  
USER MANUAL  
 

Mountfield Lawn Mower SP474 User Manual
Murphy Automobile Parts SV Series User Manual
NETGEAR Network Hardware STM300EW 100NAS User Manual
Nikon MP3 Player Accessories EH 61 User Manual
NordicTrack Treadmill NTL10850 User Manual
Nortel Networks Switch NN47230 103 User Manual
Omnimount TV Mount 1004164 User Manual
Onkyo Speaker System HTP 980 User Manual
Oster Mixer 131542 User Manual
Panasonic Portable DVD Player DVDL50D User Manual