Oregon Scientific Heart Rate Monitor SE112 User Manual

Oregon Scientific™ VIBRA-TRAINER / VIBRA-TRAINER PRO  
Model: (SE112)  
User Manual  
TABLE OF CONTENTS  
I
ntroduction .......................................................................................................... 1  
Key features ......................................................................................................... 2  
Watch ............................................................................................................... 2  
LCD display ...................................................................................................... 2  
Getting started ..................................................................................................... 3  
Unpacking the watch ........................................................................................ 3  
Turning on the watch (first-time use only) ........................................................ 3  
Batteries ........................................................................................................... 3  
Wearing the chest belt ...................................................................................... 5  
Activating the backlight ..................................................................................... 5  
Switching between operation modes ................................................................ 6  
Changing the settings ....................................................................................... 6  
Using the clock .................................................................................................... 6  
Using the real-time clock .................................................................................. 6  
Using the alarm clock ....................................................................................... 6  
User profile ........................................................................................................... 7  
About the fitness index ....................................................................................... 8  
Displaying the fitness index ............................................................................... 8  
About the SMART TRAINING PROGRAM .......................................................... 8  
SMART TRAINING PROGRAM ....................................................................... 9  
Training zones ................................................................................................. 9  
Using the SMART TRAINING PROGRAM .......................................................... 10  
To enter training parameters ............................................................................ 10  
To start the SMART TRAINING PROGRAM .................................................... 11  
To stop the SMART TRAINING PROGRAM .................................................... 11  
To view calories consumed and fat burn .......................................................... 11  
Heart rate alert ..................................................................................................... 12  
Stopwatch ............................................................................................................ 12  
Recalling training data ........................................................................................ 13  
Care instructions ................................................................................................. 14  
Effective use and range ...................................................................................... 15  
Aquatic and outdoor activities .......................................................................... 15  
Tips for keeping your watch fit .......................................................................... 16  
Training tips ......................................................................................................... 16  
Specifications ...................................................................................................... 17  
Warnings .............................................................................................................. 18  
Additional resources ........................................................................................... 18  
SE112_Eng(24/04)  
1
5/14/03, 4:03 PM  
 
KEY FEATURES  
Watch  
Item  
1
Button  
Press to…  
MEM / LAP  
Display training records and Mark a lap  
2
3
MODE  
LIGHT  
Switch to another mode  
Turn on the backlight for 5 seconds  
4
View the SMART TRAINING  
PROGRAM or stopwatch  
ST / SP / +  
Change a value in setting mode  
Enter setting mode  
5
SET  
Select another setting option  
Display calorie count and fat burn  
during training  
LCD Display  
Item  
A
Icon  
Shows when…  
Heart rate alert is set to vibrate  
B
Total exercise time is displayed  
Daily alarm is set  
TTL TIME  
C
D
Current Heart rate is above Upper  
limit or below Lower limit  
or  
E
F
Average heart rate is displayed  
Heart rate is above or below limit  
Battery is too low for vibrate function  
AVG  
G
VIBRO  
TIMER  
SMART TRAINING PROGRAM is  
shown or running  
H
Stopwatch is shown or running  
Battery is low  
STW  
I
J
Lap memory is shown  
LAP  
K
L
Memory is shown  
MEM  
Heart rate receiving mode is active  
M
Blinks when receiving heart rate signal  
2
SE112_Eng(24/04)  
3
5/14/03, 4:04 PM  
 
GETTING STARTED  
UNPACKING THE WATCH  
When you unpack your VIBRA-TRAINER PRO fitness watch, make sure  
to keep all the packing materials in a safe place, in case you need to  
later transport or return the product for servicing.  
In the box, you will find:  
Watch  
Heart rate chest belt  
2x CR2032  
User manual  
lithium batteries  
(already installed)  
User Manual  
BATTERY  
CR2032  
TURNING ON THE WATCH (First-time use only)  
Press any button to activate the LCD Display.  
BATTERIES  
The VIBRA-TRAINER PRO uses two CR2032 lithium batteries – one for  
the receiver watch and another for the heart rate chest belt. Both are  
already installed.  
When the watch battery is running low, the low battery indicator  
displays. The  
vibration alert will not work when the battery is too low. VIBRO will display.  
When the heart rate chest belt battery is exhausted, it stops transmitting signals to  
the receiver watch.  
The batteries typically last one year. We highly recommend that you contact  
the retailer or our customer service department if you need to replace them.  
Instructions follow.  
To replace the watch battery:  
1.  
2.  
Turn the watch over so that you are looking at the back plate.  
Using a small screwdriver, remove the four screws that hold the  
back plate into position (Figure 1).  
3
SE112_Eng(24/04)  
4
5/14/03, 4:04 PM  
 
3.  
4.  
5.  
6.  
7.  
8.  
Remove the back plate and set it aside.  
With your finger, remove the battery cover plate and set it aside.  
With your finger, remove the old CR2032 battery and set it aside.  
Slide the new CR2032 battery into the battery compartment.  
Replace the battery cover plate.  
Replace the back plate and screws.  
Figure 1  
To replace the chest belt battery:  
1.  
2.  
Locate the battery compartment on the front of the chest belt (Figure 2).  
With your finger, slide the battery compartment lid counter-  
clockwise until it clicks out of place.  
3.  
4.  
5.  
Set the battery compartment lid aside.  
With your finger, remove the old CR2032 battery and set it aside.  
Slide the new CR2032 into place, making sure that the connection  
points touch the contact plate.  
6.  
Replace the battery compartment lid. (+ side upwards)  
+
Figure 2  
4
SE112_Eng(24/04)  
5
5/14/03, 4:04 PM  
 
WEARING THE CHEST BELT  
The heart rate chest belt is used to count your heartbeat and transmit  
the data to the watch. To wear the chest belt:  
1. Wet the conductive pads on the underside of the chest belt with few  
drops of water or a conductive gel to ensure a solid contact.  
2. Strap the heart rate chest belt across your chest. To ensure an  
accurate heart rate signal, adjust the strap until the belt sits snugly  
below your pectoral muscles (Figure 3).  
Figure 3  
Tips:  
The position of the chest belt affects its performance. Move the  
chest belt along the strap so that it falls above your heart.  
Avoid areas with dense chest hair.  
In dry, cold climates, it may take several minutes for the chest belt  
to function steadily. This is normal and should improve with  
several minutes of exercise.  
NOTE If the watch is kept idle without receiving a Heart Rate signal for 5 minutes,  
the Heart Rate mode will quit and return to Clock mode.  
ACTIVATING THE BACKLIGHT  
Press LIGHT to turn on the backlight for five seconds.  
NOTE The backlight does not work when the low battery indicator  
is  
shown. This is to conserve battery power, and will return to normal  
once the batteries are replaced.  
5
SE112_Eng(24/04)  
6
5/14/03, 4:04 PM  
 
SWITCHING BETWEEN OPERATION MODES  
Press MODE to switch between the five operation modes: real-time clock,  
alarm clock, user profile, SMART TRAINING PROGRAM, and stopwatch.  
The modes are described in the sections that follow.  
You can run the SMART TRAINING PROGRAM or stopwatch in the  
background as you access other modes. The icon for the mode that is  
running will flash until you switch back to that mode.  
CHANGING THE SETTINGS  
To change the any watch setting (such as time, alarm clock, user profile, etc.)  
1.  
2.  
3.  
4.  
Press MODE to switch to the desired mode.  
Press and hold SET until the first setting for that mode flashes.  
Press ST / SP / + to change the setting. Hold to speed through the options.  
Repeat Steps 2 – 3 to change other settings for that mode.  
USING THE CLOCK  
USING THE REAL-TIME CLOCK  
The real-time clock is the default display for the VIBRA-TRAINER PRO  
watch, and tracks the time, date, month, and day of week. The clock is  
programmed with a 50-year auto-calendar, which means you do not  
need to reset the days of the week and dates each month.  
Refer to the “Changing the Settings” section to set the real-time clock.  
USING THE ALARM CLOCK  
To activate the alarm, press SET while the alarm time is displayed. The alarm  
icon will display whenever the alarm is set. When the feature is activated, a beep  
will sound at the designated time each day. Press any button to stop the alarm. It  
will ring at the same time the next day unless you turn the feature off.  
6
SE112_Eng(24/04)  
7
5/14/03, 4:04 PM  
 
USER PROFILE  
To access the full benefits of using the VIBRA-TRAINER PRO sports  
watch, set up your user profile before you exercise with the watch. This  
will automatically generate a fitness index, and allows you to track your  
progress over time.  
With the user profile, you can enter information about yourself to help  
determine your proper fitness index level (described on page 8). The  
user profile includes the following metrics: sex, age, weight (kg or lbs),  
height (feet / inches, or centimeters), and activity level.  
The activity level is based on your own self-assessment of the amount  
of exercise you regularly perform.  
Activity level  
Description  
0
Low – You do not usually participate in programmed  
recreation sports or exercise.  
1
2
Medium – You are engaged in modest physical  
activity (such as golfing, horseback riding, table  
tennis, calisthenics, bowling, weight lifting, yard  
work, or gymnastics) two or three times a week  
totaling one hour per week.  
High – You actively and regularly participate in  
heavy physical exercise (such as running, jogging,  
swimming, cycling, or skipping rope) or engage in  
vigorous aerobic exercise (such as tennis,  
basketball or handball).  
Refer to the “Changing the Settings” section to set your user profile.  
Once you complete your user profile, a fitness index is automatically calculated and  
displayed for you. Refer to page 8 for a description of the fitness index.  
7
SE112_Eng(24/04)  
8
5/14/03, 4:04 PM  
 
NOTE You can display and adjust your user profile at any time. For example, if your  
level of physical activity changes, or you celebrate a birthday, you may want to  
update your record.  
NOTE You must set up your user profile to use the calorie count and fat burn features.  
ABOUT THE FITNESS INDEX  
Your VIBRA-TRAINER PRO will generate a fitness index based on your  
aerobic fitness, or your capacity to engage in any form of aerobic exercise.  
This index is dependent and limited by the bodys ability to deliver oxygen to  
the working muscles in training. It is often measured by maximum oxygen  
uptake (VO2 Max), which is defined as the highest amount of oxygen that  
can be utilized when exercising at an increasingly demanding level. The  
lungs, heart, blood, circulatory system, and working muscles are all factors  
in determined VO2 Max. The unit of VO2 Max is ml/kg min.  
Generally, the fitness range is from 13 to 53. The higher the index, the fitter  
you are. For your reference, an average 37-year-old man has an index  
between 39 and 48.  
DISPLAYING THE FITNESS INDEX  
Press MODE to access the User mode. Then, press MEM to display  
your fitness index.  
NOTE If you have not completed your user profile, the fitness index  
will not display.  
ABOUT THE SMART TRAINING PROGRAM  
It is important to know your maximum heart rate (MHR), your training  
zone, upper heart rate limit, and lower heart rate limit before you begin  
any exercise program. These metrics help you achieve the maximum  
health benefits from your workout.  
8
SE112_Eng(24/04)  
9
5/14/03, 4:04 PM  
 
SMART TRAINING PROGRAM  
Your VIBRA-TRAINER PRO watch is equipped with a special SMART  
TRAINING PROGRAM that tracks your heart rate during exercise. This  
automatically sets your personal upper and lower heart rate limits, which  
are monitored as you exercise. Alternatively, you can calculate your own  
heart rate limits following the instructions below:  
Sex  
MHR  
Lower limit  
Upper limit  
Men  
220 – age = MHR  
MHR x  
MHR x  
(upper training zone %)  
(lower training zone %)  
Women 230 – age = MHR  
TRAINING ZONES  
There are three training zones, as described below.  
Training Zone  
MHR %  
Description  
Health Maintenance  
50 – 65%  
This is the lowest training intensity level  
(50 – 65% MHR). It is good for beginners  
and those who want to strengthen their  
cardiovascular systems.  
Aerobic Exercise  
65 – 80%  
80 – 95%  
Increases strength and endurance. It  
works within the bodys oxygen intake  
capability, burns more calories, and can  
be maintained for a long period of time.  
Anaerobic Exercise  
Generates speed and power. It works at  
or above the bodys oxygen intake  
capability, builds muscle, and cannot be  
maintained for a long period of time.  
The SMART TRAINING PROGRAM will guide you through from a 5-minute warm up  
to the end of your exercise program. In addition to monitoring your heart rate and  
alerting you whenever you fall out of the range for the selected training zone, the  
Program allows you to check the calories consumed and the percentage of fat burned.  
You can also check the percentage of calories consumed through burning fat.  
9
SE112_Eng(24/04)  
10  
5/14/03, 4:04 PM  
 
USING THE SMART TRAINING PROGRAM  
The SMART TRAINING PROGRAM monitors your exercise performance once you  
enter the parameters (described below) and activate the program.  
NOTE You cannot use the stopwatch if you are running the SMART TRAINING  
PROGRAM.  
TO ENTER TRAINING PARAMETERS:  
Press MODE to access the TIMER mode. Then, press and hold SET until “T. Act”  
displays on the screen. Use the SET and ST / SP / + buttons to change each setting:  
Setting  
Options  
Description  
Training Activity Level  
0 – 2  
Choose the level of activity that  
best describes the workout you are  
planning. Refer to page 7 for a  
description.  
Lower heart rate  
Upper heart rate  
Varies  
The VIBRA-TRAINER PRO  
automatically suggests the heart rate  
limits for you, based on your user  
profile and the training activity level  
you set. You can choose to accept or  
change these parameters; if you  
change them, be sure that the lower  
limit does not exceed the higher limit.  
The watch will automatically adjust  
the limits if the data entered is out of  
range or illogical.  
NOTE You can only set Lower Heart  
Rate Limit in-between 30-220bpm  
(beats per minute) and the Upper  
Heart Rate Limit in-between 80-  
240bpm.  
10  
SE112_Eng(24/04)  
11  
5/14/03, 4:04 PM  
 
Alert  
Heart rate transmission is active,  
but no alarm is set.  
Only the sound alarm is on.  
Only the vibration alarm is on.  
+
All alarms (sound + vibration) are  
on.  
+
Exercise Time  
HH:MM  
Set the amount of time that you  
expect to exercise. The maximum  
is 99 hours, 54 minutes.  
TO START THE SMART TRAINING PROGRAM:  
Press and hold ST / SP / +.  
The SMART TRAINING PROGRAM starts with an automatic five-minute  
warm-up session. This prepares you for the training ahead. If you wish to  
skip the warm-up, press and hold the ST / SP / + button again. If you  
continue, three short beeps will sound to mark the end of the warm-up, and  
again at the end of your training session.  
As you exercise, your current heart rate will be displayed. If the heart rate  
monitor continually reads 0, adjust the chest belt and make sure the receiver  
watch is the specified distance from the belt (refer to the “Effective Use and  
Range” section for more information).  
TO STOP THE SMART TRAINING PROGRAM:  
Press and hold ST / SP / +. Once you stop the program, you cannot resume.  
You must enter a new SMART TRAINING PROGRAM.  
TO VIEW CALORIES CONSUMED AND FAT BURN  
Press SET while the SMART TRAINING PROGRAM is running.  
11  
SE112_Eng(24/04)  
12  
5/14/03, 4:04 PM  
 
HEART RATE ALERT  
The VIBRA-TRAINER PRO is equipped with vibrate and sound heart  
rate alerts that you can set at your preference. The vibrate alert is useful  
for times when you do not want to disturb others who are exercising, or  
when you do not want your competitor to know that you are reaching the  
limit.  
When the alert is activated, a flashing down arrow or up arrow will appear  
on the display whenever you surpass your heart rate limits. Depending  
on which setting you selected, the watch will either vibrate, sound with a  
2-beep warning, or alert you with both alarms.  
The heart rate alert is set with the SMART TRAINING PROGRAM  
parameters. Refer to the previous section for instructions.  
NOTE Using the vibrate feature consumes battery life at a faster rate than  
the sound alarm.  
NOTE If the watch is kept idle without receiving a Heart Rate signal for 5 minutes,  
the Heart Rate mode will quit and return to Clock mode.  
STOPWATCH  
Before using the stopwatch, you must enter your training parameters (activity level, upper  
/ lower heart rate limits, heart rate alert, and exercise time – described on page 7). To  
access the parameters, press MODE to access the STW mode. Then press SET until “T.  
Act” shows on the display. Use the ST / SP / + and SET buttons to update and select each  
option. Refer to page 7 for a description.  
NOTE You cannot use the SMARTTRAINING PROGRAM if you are running the stopwatch.  
NOTE The stopwatch begins measurement in min : sec : 1/100 sec  
After 59 minutes pass, the display will change to hrs : min : sec.  
12  
SE112_Eng(24/04)  
13  
5/14/03, 4:04 PM  
 
Once the stopwatch is activated, you can perform the following tasks:  
Task  
Instruction  
Start stopwatch  
Pause / resume stopwatch  
Stop / clear stopwatch  
Save lap  
Press ST / SP / +.  
Press ST / SP / +.  
Press and hold ST / SP / +.  
Press MEM / LAP while the stopwatch is  
running.  
NOTE Up to 44 laps (99 hours, 59 minutes total)  
can be stored in the memory.  
Show calories consumed  
and fat burn  
Press SET while the stopwatch is running.  
Show overall performance  
Pause or stop the stopwatch, then press MEM  
to view:  
The amount of exercise time within your  
personal training zone;  
Total exercising time and average heart  
rate; and  
Calories consumed and percent fat burn.  
Show lap performance  
Pause or stop the stopwatch, then press SET  
until the lap number flashes. Press ST / SP / +  
to switch between laps. Press MEM / LAP to  
view individual lap performance.  
RECALLING TRAINING DATA  
You can check the calories consumed and the percent of fat burn during  
or after exercise. To recall this data while you are running the SMART  
TRAINING PROGRAM or stopwatch, press SET.  
To recall this data after exercise (once the SMARTTRAINING PROGRAM  
or stopwatch is stopped), press MEM. The following information is  
summarized for your training session:  
13  
SE112_Eng(24/04)  
14  
5/14/03, 4:04 PM  
 
The amount of exercise time within your personal training zone;  
Total exercising time and average heart rate; and  
Calories consumed and percent fat burn.  
To view individual lap performance with the stopwatch paused or stopped, press SET  
until the lap number flashes. Press MEM / LAP to view individual lap performance. To  
switch between laps, press ST / SP / +.  
CARE INSTRUCTIONS  
To ensure you receive the maximum benefit from using this product,  
please observe the following guidelines.  
Clean the watch and chest belt thoroughly after each training session.  
Use a soft, slightly moistened cloth. Do not use abrasive or corrosive  
cleaning agents, as these may cause damage.  
Avoid pressing the buttons with wet fingers, underwater, or in heavy  
rain, as this may allow water to gain entry into the electrical circuitry.  
Do not subject the product to excessive force, shock, dust, temperature  
changes, or humidity. Such treatment may result in malfunction.  
Do not tamper with the internal components. Doing so will terminate the  
product warranty and may cause damage. The main unit contains no  
user-serviceable parts.  
Do not scratch hard objects against the LCD display as this may cause  
damage.  
Remove the batteries whenever you are planning to store the product  
for a long period of time.  
When replacing batteries, use new batteries as specified in this user  
manual.  
14  
SE112_Eng(24/04)  
15  
5/14/03, 4:04 PM  
 
EFFECTIVE USE AND RANGE  
The heart rate chest belt and watch have a maximum transmission range  
of about 30 inches (76 centimeters). If the signal is weak, take the  
following steps.  
Shorten the distance between the heart rate chest belt and watch.  
Re-adjust the position of the heart rate chest belt.  
Check the batteries. If they are low or exhausted, the range may  
be less.  
You can wear the receiver watch on your wrist or strap it to a bike or exercise  
machine, as shown below.  
Figure 4  
Figure 5  
AQUATIC AND OUTDOOR ACTIVITIES  
The watch is water-resistant up to 165 feet (50 meters). The chest belt is  
water-resistant up to 32 feet (10 meters), but should not be worn for  
underwater activities, as the heart rate transmission cannot occur under  
water. Refer to the table for proper use guidelines.  
SHOWERING  
( WARM / COOL  
WATER ONLY )  
SHALLOW DIVING /  
SURFING /  
WATER SPORTS  
SNORKELING  
DEEP WATER  
DIVING  
/
RAIN  
SPLASHES, ETC  
LIGHT SWIMMING  
/
SHALLOW WATER  
30m / 100ft  
50m / 165ft  
OK  
NO  
NO  
OK  
OK  
OK  
OK  
NO  
NO  
NO  
NO  
OK  
OK  
OK  
OK  
100m / 325ft  
15  
SE112_Eng(24/04)  
16  
5/14/03, 4:05 PM  
 
When using the watch for aquatic or outdoor sports activities, observe  
the following guidelines:  
Do not press the buttons underwater or with wet fingers.  
Rinse with water and mild soap after use.  
Do not use in hot water.  
TIPS FOR KEEPING YOUR WATCH FIT:  
Keep your watch water resistant! Avoid chemicals (gasoline, chlorine, perfumes,  
alcohol, hair sprays, etc.). Rinse after use. Reduce exposure to heat. Have your watch  
serviced by an approved service center once yearly.  
TRAINING TIPS  
To gain the maximum benefit from your training program, and to ensure  
that you exercise safely, please observe the following guidelines:  
Start with a well-defined training goal, such as to lose weight, keep fit, improve  
health or compete in a sporting event.  
Select a training activity you enjoy, and vary your training activities to exercise  
different muscle groups.  
Start slowly, and then gradually step up your work out as you become fitter.  
Exercise regularly. To maintain a healthy cardio-vascular system, 20 - 30 minutes  
three times a week is recommended.  
Always allow at least five minutes before and after exercising for warm-up and  
cool-down.  
Measure your pulse after training. Then repeat the procedure again after three  
minutes. If it does not return to its normal resting rate, you may have trained too  
hard.  
Always check with your doctor before starting a vigorous training program  
16  
SE112_Eng(24/04)  
17  
5/14/03, 4:05 PM  
 
SPECIFICATIONS  
Clock:  
Time format  
Date format  
12 hr / 24hr  
DD / MM (date / month) or MM / DD  
(month / date)  
Year format  
Alarm  
2001-2050 (auto-calendar)  
Daily alarm  
Stopwatch:  
Stopwatch  
Resolution  
Lap counter  
99:59:59 (hrs:min:sec)  
1/100sec  
44 laps share 99:59:59 (hrs:min:sec)  
Smart Training Program:  
Timer  
99:54:00 (hrs:min:sec)  
Performance tracking:  
Heart rate (HR) alarm  
HR measuring range  
Lower HR settable range  
Upper HR settable range  
HR zone limit  
Vibrate / sound  
30 – 240 bpm (beats per minute)  
30 – 220 bpm (beats per minute)  
80 – 240 bpm (beats per minute)  
30 – 240 bpm (beats per minute)  
0 – 9,999 kcal  
Calories calculation  
% fat burning calculation  
0 – 99%  
Transmission:  
Range  
30 inches (76 cm) may decrease with low  
battery)  
Water resistance:  
Watch  
Chest belt  
135 feet (50 meters) (not actuating keys)  
32 feet (10 meters)  
Power:  
Power supply  
Watch – 1x CR2032 3V lithium battery  
Chest belt – 1x CR2032 3V lithium battery  
Operating environment:  
Operation temperature  
Storage temperature  
41° F…104° F (5° C … 40° C)  
-4° F … 158° F (-20° C ….70° C)  
17  
SE112_Eng(24/04)  
18  
5/14/03, 4:05 PM  
 
WARNINGS  
To ensure you use your product correctly and safely, read these Warnings  
and the entire user manual before using the product. The warnings given  
here provide important safety information and should be observed at all  
times.  
WARNINGS  
The product is a precision instrument. Never attempt to take this  
device apart. Contact the retailer or our customer service  
department if the product requires servicing.  
Do not touch the exposed electronic circuitry, as there is a danger  
of electric shock.  
Take precautions when handling all battery types.  
Remove the batteries before storing the product for a long period  
of time.  
Do not use the chest belt in aircrafts or hospitals. The use of  
radio frequency products can cause malfunctions in the control  
devices of other equipment.  
Do not subject the product to impact or shock.  
Check all major functions if the device has not used for a long  
while. Maintain a regular internal testing and cleaning of your  
device.  
When disposing of this product, do so in accordance with your  
local waste disposal regulations.  
ADDITIONAL RESOURCES  
VIBRA-TRAINER PRO sports watch and other Oregon Scientific™  
products such as digital cameras, hand-held organizers, alarm clocks,  
and weather stations. The website also includes contact information for  
our customer service department, in case you need to reach us.  
© 2003 Oregon Scientific. All rights reserved.  
18  
SE112_Eng(24/04)  
19  
5/14/03, 4:05 PM  
 

Miele Clothes Dryer W 3000 User Manual
Miele Microwave Oven M Nr 09 798 370 User Manual
MTD Automobile Parts 179cc 208cc User Manual
Napoleon Grills Outdoor Fireplace GD33NR User Manual
NEC Laptop VT 300 Series User Manual
NETGEAR Network Router MBRN3000 100NAS User Manual
Olympus Microcassette Recorder VN 5500 User Manual
Oster Blender 2605 User Manual
Oster Toaster 119308 User Manual
Panasonic Patio Furniture EP MS40 User Manual