Oregon Scientific Radar Detector WMR100 User Manual

QUICK START GUIDE SET-UP MAIN UNIT  
WMR100 ADVANCED WEATHER STATION  
with Wireless Sensor Set and Mounting Package  
B
1
2
3
UNPACK  
A
Make sure that you have all of the parts shown here before  
the installation of the Advanced Weather Station.  
MAIN UNIT  
RAIN GAUGE  
1
2
3
Install 4 AA batteries located  
underneath the base unit.  
Install power plug into the base station  
and insert the AV adapter into the wall  
outlet.  
Press the RESET button.  
Filter  
1×  
3×  
6×  
Rain Collector  
Screws (Type C)  
1×  
WMR100 Base  
6V Adapter  
1×  
4×  
1×  
1×  
SET-UP INTEGRATED WIND SENSOR  
C
1.5V AA Batteries  
Washers  
2×  
1.5V AA Batteries  
USB Cable  
5
POLE MOUNT  
2
INTEGRATED WIND GAUGE  
4
8
Support Base  
Pole Sections  
1×  
3×  
1×  
1
6
7
3
Wind Vane  
1×  
Round  
U-Shaped Bolts  
Cone-Shaped End  
2×  
9
1
4
8
9
Slide wind direction indicator onto wind sensor and align  
the screw holes. After aligning the holes, use a Type B  
screw to secure.  
Rotate the battery cover counter-clockwise and slide cover off  
to expose the battery compartment. Insert 4 AA batteries.  
Wind Speed: Gently rotate the wind vane and confirm a  
numerical reading on the base unit ( ). Wind Direction  
Indicator: Move the direction of the wind indicator and verify the  
icon moves in the same ( ).  
Wind Sensor  
Stem  
Wind Direction  
Indicator  
Metal Pins  
Tension Strings  
3×  
3×  
4×  
1×  
4×  
1×  
2×  
5
6
Press the RESET button.  
2
3
Attach the wind speed vane on the top of the wind sensor,  
align the holes, and use a Type B screw to secure.  
Rotate the battery cover clockwise and slide cover on to close  
the battery compartment.  
To test the temperature reading, press the SELECT button on  
the black rotating dial until the selected area icon ( ) is on the  
When installing outside, rotate the NORTH Indicator  
reference line to the “north” and align the wind indicator  
in the same direction.  
second level (  
) of the LCD display. Rotate the dial clockwise  
7
On the base station, press the SEARCH button to initiate a  
wireless sensor search.  
to channel 1 and verify a numeric reading.  
Rectangular  
Base Legs  
Screws (Type A)  
2×  
1.5V AA Batteries  
Screws (Type B)  
 

Mr Heater Automobile SRC15T User Manual
Multiquip Portable Generator DCA125USI3CAN User Manual
Multiquip Trash Compactor HATZ1D81S 325 User Manual
Multi Tech Systems Modem MT9234ZBA User Manual
NETGEAR Network Card WN711 User Manual
Nostalgia Electrics Frozen Dessert Maker DFIM SERIES User Manual
Omnimount TV Mount 1N1 M User Manual
Oreck Vacuum Cleaner MODEL AV 701B User Manual
Oregon Scientific Clock BARM839 User Manual
Patton electronic Network Card 1018RC User Manual