Pioneer X EM21V User Manual

DVD Receiver System  
Micro chaîne DVD  
DVD-Receiversystem  
Sistema DVD con amplificatore  
DVD Receiver System  
Sistema receptor de DVD  
X-EM21V  
Discover the benefits of registering your product online at  
Découvrez les nombreux avantages offerts en enregistrant votre produit en ligne  
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter  
Registra il tuo prodotto su http://www.pioneer.it  
(o http://www.pioneer.eu) e scopri subito quali vantaggi puoi ottenere!  
Ontdek nu de voordelen van online registratie! Registreer uw Pioneer product  
-
Registre su producto en http://www.pioneer.es (o en  
http://www.pioneer.eu) Descubra los beneficios de registrarse on-line:  
Operating Instructions  
Mode d’emploi  
Bedienungsanleitung  
Istruzioni per l’uso  
Handleiding  
Manual de instrucciones  
If the AC plug of this unit does not match the AC  
outlet you want to use, the plug must be removed  
and appropriate one fitted. Replacement and  
mounting of an AC plug on the power supply cord of  
this unit should be performed only by qualified  
service personnel. If connected to an AC outlet, the  
cut-off plug can cause severe electrical shock. Make  
sure it is properly disposed of after removal.  
CAUTION  
The STANDBY/ON switch on this unit will not  
completely shut off all power from the AC outlet.  
Since the power cord serves as the main disconnect  
device for the unit, you will need to unplug it from the  
AC outlet to shut down all power. Therefore, make  
sure the unit has been installed so that the power  
cord can be easily unplugged from the AC outlet in  
case of an accident. To avoid fire hazard, the power  
cord should also be unplugged from the AC outlet  
when left unused for a long period of time (for  
The equipment should be disconnected by removing  
the mains plug from the wall socket when left unused  
for a long period of time (for example, when on  
vacation).  
D3-4-2-2-1a_A1_En  
example, when on vacation).  
D3-4-2-2-2a*_A1_En  
Condensation  
POWER-CORD CAUTION  
If the unit is moved suddenly from a cold place into a  
warm room (in winter, for example) or if the temperature  
in the room in which the player is installed rises  
suddenly due to a heater, etc., water droplets  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power  
cord when your hands are wet as this could cause a  
short circuit or electric shock. Do not place the unit, a  
piece of furniture, etc., on the power cord, or pinch the  
cord. Never make a knot in the cord or tie it with other  
cords. The power cords should be routed such that they  
are not likely to be stepped on. A damaged power cord  
can cause a fire or give you an electrical shock. Check  
the power cord once in a while. When you find it  
damaged, ask your nearest PIONEER authorized  
(condensation) may form inside (on operating parts and  
the lens). When condensation is present, the player will  
not operate properly and playback is not possible. Let  
the player stand at room temperature for 1 or 2 hours  
with the power turned on (the time depends on the  
extent of condensation). The water droplets will  
dissipate and playback will become possible.  
Condensation can also occur in the summer if the  
player is exposed to the direct wind from an  
service center or your dealer for a replacement.  
S002*_A1_En  
air-conditioner. If this happens, move the player to a  
different place.  
S005_A1_En  
Information for users on collection and disposal of old equipment and used batteries  
Symbol for  
equipment  
These symbols on the products, packaging, and/or accompanying documents mean  
that used electrical and electronic products and batteries should not be mixed with  
general household waste.  
For proper treatment, recovery and recycling of old products and used batteries,  
please take them to applicable collection points in accordance with your national  
legislation.  
By disposing of these products and batteries correctly, you will help to save valuable  
resources and prevent any potential negative effects on human health and the  
environment which could otherwise arise from inappropriate waste handling.  
Symbol examples  
for batteries  
For more information about collection and recycling of old products and batteries,  
please contact your local municipality, your waste disposal service or the point of sale  
where you purchased the items.  
These symbols are only valid in the European Union.  
For countries outside the European Union:  
If you wish to discard these items, please contact your local authorities or dealer and  
ask for the correct method of disposal.  
Pb  
K058a_A1_En  
Thank you for buying this Pioneer product.  
Please read through these operating instructions so that you will know how to operate your model properly. After you  
have finished reading the instructions, put them in a safe place for future reference.  
Contents  
01 Before you start  
06 Other features  
Feature introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Sound effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Compatible iPod/iPhone models . . . . . . . . . . . . . . . . . . . .5  
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Battery installation of the remote control . . . . . . . . . . . 5  
Replacing the battery (CR2025, 3 V). . . . . . . . . . . . . . . . . .5  
Playing iPod/iPhone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Load the iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Listen to the iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Charge the iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Remove the iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Listening to the FM radio. . . . . . . . . . . . . . . . . . . . . . . . 17  
Program radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Tune to a programmed radio station . . . . . . . . . . . . . . . . 17  
Displaying RDS information . . . . . . . . . . . . . . . . . . . . . 18  
Searching for RDS programs . . . . . . . . . . . . . . . . . . . . 18  
ASPM (Auto Station Program Memory). . . . . . . . . . . . 18  
Playing audio from an external device . . . . . . . . . . . . . 18  
Listening through the headphones . . . . . . . . . . . . . . . 18  
Turning on/off automatically . . . . . . . . . . . . . . . . . . . . . 18  
Use the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
02 Part names and functions  
Overview of the main unit . . . . . . . . . . . . . . . . . . . . . . . . 7  
Overview of the remote control . . . . . . . . . . . . . . . . . . . . 8  
03 Connections  
Connect speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
FM Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connect TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Option 1: Connect through a composite  
video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Option 2: Connect through component  
video cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Connect power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
07 Setup  
Interface for setup menu. . . . . . . . . . . . . . . . . . . . . . . . 20  
Changing a setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
System setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Language setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Audio setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Digital setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
04 Getting started  
Turning on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
APS mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Finding the correct video input channel . . . . . . . . . . . 12  
Selecting the correct TV system . . . . . . . . . . . . . . . . . . 12  
Selecting a language for on-screen display. . . . . . . . . 12  
08 Additional information  
Types of playable discs . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Discs that cannot be played. . . . . . . . . . . . . . . . . . . . . . . 23  
DivX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
USB playability information. . . . . . . . . . . . . . . . . . . . . . 23  
Supported MP3/WMA in the disc. . . . . . . . . . . . . . . . . 23  
RDS program types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
iPod and iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
When moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Do not place objects on this unit . . . . . . . . . . . . . . . . . . . 27  
Cleaning the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning the lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
About specially shaped discs. . . . . . . . . . . . . . . . . . . . . . 28  
About iPod/iPhone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
05 Playing  
Basic operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Playing recorded files. . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Accessing a category. . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Accessing a folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Playing a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Playing slideshow and music simultaneously. . . . . . . 14  
Controlling playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Searching by time or title/chapter/track number . . . . 16  
Program play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Adjusting sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
4
En  
Before you start  
01  
Chapter 1:  
Before you start  
Feature introduction  
Battery installation of the remote  
control  
This product can  
play videos, audios, and display pictures from discs and  
USB storage devices  
Remove the insulation insert before the first  
play audios from iPod/iPhone  
time use.  
For the details of supported media, refer to “Specifications”.  
Sound effect  
This product supports the sound output by EQ and P.BASS.  
Compatible iPod/iPhone models  
The product supports the following iPod and iPhone models.  
iPod touch (1st, 2nd, 3rd, and 4th generation)  
iPod classic  
iPod nano (3rd, 4th, 5th, and 6th generation)  
iPhone 4  
iPhone 3GS  
iPhone 3G  
iPhone 4S  
Replacing the battery (CR2025, 3 V)  
1
Open the battery drawer indirection.  
Some of the functions may be restricted for some models.  
This product has been developed and tested for the  
software version of iPod/iPhone indicated on the website  
of Pioneer.  
Open  
(http://pioneer.jp/homeav/support/ios/eu/)  
Installing software versions other than the ones  
indicated on the website of Pioneer to your iPod/iPhone  
may result in incompatibility with this product.  
2
Gently press the edge of the battery (the  
dotted section on the diagram below) and  
remove the battery.  
What’s in the box  
Check and identify the contents of your package:  
Micro music system  
Remote control  
Video cables (yellow connectors)  
AC power cord  
Warranty Card  
Operating Instructions (this document)  
5
En  
01  
Before you start  
3
Turn the battery case upside-down, set the  
CAUTION  
new battery with the  
it diagonally then gently press it down.  
side facing down, insert  
Do not use any batteries other than the ones specified.  
When loading the batteries into the remote control, set  
them in the proper direction, as indicated by the polarity  
marks (and ).  
Do not heat batteries, disassemble them, or throw them  
into flames or water.  
Batteries may have different voltages, even if they look  
similar.  
To prevent leakage of battery fluid, remove the batteries  
if you do not plan to use the remote control for a long  
period of time (1 month or more). If the fluid should leak,  
wipe it carefully off the inside of the case, then insert new  
batteries. If a battery should leak and the fluid should get  
on your skin, flush it off with large quantities of water.  
4
Close the battery drawer indirection.  
When disposing of used batteries, please comply with  
governmental regulations or environmental public  
institution’s rules that apply in your country/area.  
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type  
recommended by the manufacturer.  
Close  
Dispose of used battery cells immediately after  
replacement. Keep away from children.  
If swallowed, please contact a doctor immediately.  
WARNING  
Lithium batteries may present a fire or chemical burn  
hazard if misused. Do not disassemble, heat above  
100 °C, or incinerate.  
Do not pull the battery in the direction shown on the  
diagram below. Doing so may damage the battery case.  
Do not use or store batteries in direct sunlight or other  
excessively hot place, such as inside a car or near a  
heater. This can cause batteries to leak, overheat,  
explode or catch fire. It can also reduce the life or  
performance of batteries.  
6
En  
Part names and functions  
02  
Chapter 2:  
Part names and functions  
Overview of the main unit  
1
9
2
3
10  
11  
12  
13  
14  
15  
16  
4
5
6
7
8
17  
1
2
3
4
5
Dock for iPod/iPhone  
6
   
Skip to the previous track.  
Connect to the iPod/iPhone.  
Press and hold to play reverse quickly within a track.  
Tune to the previous radio station.  
Press and hold to search the previous radio station  
automatically.  
STANDBY/ON  
Switch between standby and on.  
STANDBY indicator  
Red lights up during standby.  
7
8
AUX IN  
Connect to the audio output socket (usually the  
headphones socket) of an external device.  
INPUT  
Press repeatedly to select the input source.  
PHONES  
Connect to headphones with a 3.5 mm connector.  
Use to play, pause, or resume playback.  
In the standby mode, press and hold to switch between  
APS on and off.  
7
En  
02  
Part names and functions  
9
Remote control sensor  
Point the remote control to this, and then operate it  
within approximately 7 m. The product may have trouble  
capturing remote control signals if there is a fluorescent  
light nearby. If this happens, move the product away  
from the fluorescent light.  
Overview of the remote control  
1
2
10  
Open or close the disc tray.  
15  
11 Main display  
12 Disc tray  
3
4
16  
17  
7
Place the disc with the label side up.  
5
6
13 P.BASS  
Switch P.BASS between on and off.  
6
14  
Use to stop playback.  
18  
19  
20  
7
8
In standby mode, press and hold to enable or disable the  
feature demonstration.  
15    
Skip to the next track.  
Press and hold to play forward quickly within a track.  
Tune to the next radio station.  
Press and hold to search the next radio station  
automatically.  
9
21  
22  
10  
23  
24  
25  
26  
27  
28  
16  
Connect to a USB storage device.  
17 VOLUME  
11  
12  
13  
14  
Rotate to increase or decrease the volume level.  
1
2
3
STANDBY/ON  
Switch between standby and on.  
Input function buttons  
Use to select the input source.  
MODE  
Use to select the play mode of each input source.  
[DVD]  
Repeat 1  
[CD]  
Repeat 1  
, Repeat title, Repeat all, Random  
, Repeat all, Random  
[USB]  
Repeat 1  
[iPod]  
Repeat 1  
, Repeat album, Repeat all, Random  
, Repeat all, Random  
4
TOP MENU  
Use to access the DVD top menu.  
8
En  
Part names and functions  
02  
5
6
SLEEP/TIMER  
20  
Set the sleep timer in the working mode.  
Set alarm timer in the standby mode.  
Use to play, pause, or resume playback.  
21 VOL +/–  
Use to set the listening volume.  
/  
Used to select contents in the video output menu.  
Tune to the station.  
22   
Use to stop playback.  
In the standby mode, press and hold to enable or disable  
the feature demonstration.  
Press and hold to search the radio station automatically.  
7
/  
Used to select contents in the video output menu.  
Select a preset radio station.  
23 EQ  
Use to select EQ.  
[ROCK] [JAZZ] [POP] [CLASSIC] Flat (off)   
(Back to beginning)  
Use to navigate through iPod/iPhone playlist.  
8
9
SYSTEM MENU  
Setup function in DVD/USB mode. (On screen)  
24 P.BASS  
Switch P.BASS between on and off.  
 /   
Skip to the track or chapter.  
Press and hold to play quickly within a track.  
25 MUTE  
Use to mute or restore volume.  
10 Numeric buttons (0 to 9)  
26 AUDIO  
/PTY/ASPM  
Use to enter numbers.  
AUDIO  
Enter the track number to select a track directly.  
Enter the sequence number to select a preset radio  
station.  
Select an audio language or an audio channel for DVD  
and VCD.  
PTY/ASPM  
Search for RDS program types.  
Press and hold to search for the RDS auto station  
program memory.  
11 REPEAT/A-B  
Select the starting and ending point for repeat play.  
12 SUBTITLE  
27 ZOOM  
During playback, this button repeatedly to select a  
desired subtitle language for DVD.  
Select the zoom ratio.  
28 STEP  
STEP  
/RDS  
13 GOTO  
Select a desired title/chapter/track/file or time with on  
screen bar.  
Used to move the currently playing video step-by-step in  
the direction of playback only.  
14 ANGLE/PROG  
RDS  
Use to select a DVD camera angle for DVD.  
Use to program audio tracks.  
Display the available information of an RDS radio  
station.  
Use to program radio stations.  
15 OPEN/CLOSE  
Open or close the disc tray.  
16 MENU  
Use to access the DVD or iPod/iPhone menu.  
17 DISPLAY/CLOCK  
Display the current status or media information.  
In the working mode, press to display the clock for a  
while.  
In the standby mode, press and hold to set the clock.  
18 ENTER  
Use to confirm actions.  
19 RETURN  
Return function in DVD mode. (On screen)  
9
En  
03  
Connections  
Chapter 3:  
Connections  
Connect speakers  
FM Antenna Installation  
Note  
Note  
• For the best sound quality, use the supplied speakers only.  
• The antenna on the back panel is used to improve reception  
of FM. Extend this antenna and fix it to a position with the  
best reception.  
• Never tug strongly on the antenna line since damage of an  
antenna may be caused.  
• This product does not support MW (medium wave) radio  
reception.  
• Connect speakers with the same or higher impedance only.  
Refer to “Additional information” > “Specifications” for  
details.  
• To avoid magnetic interference or unwanted noise, never  
place this product too close to any radiation devices.  
L
L
Y
R
Pb/Cb  
Pr/Cr  
R
R
SPEAKER  
8
L
VIDEO  
FM ANT.  
L
L
Y
R
Pb/Cb  
P/Cr  
R
R
SPEAKER  
8
L
VIDEO  
FM ANT.  
Connect the speaker cable plugs to the SPEAKER sockets.  
AC IN  
the left one to the L+/L– socket  
the right one to the R+/R– socket  
FM ANT.  
10  
En  
Connections  
Connect TV  
03  
Connect power  
Connect the audio and video cables to the output sockets on  
the product and the corresponding input sockets on your TV.  
Select the best video connection that your TV supports.  
Note  
• Before you connect the AC power cord, make sure that you  
have completed all other connections.  
Option 1: Connect through a composite  
video cable  
L
L
Y
R
Pb/Cb  
Pr/Cr  
R
R
SPEAKER  
8
L
VIDEO  
FM ANT.  
To the wall  
outlet  
AC IN  
TV  
Connect the AC power cord to  
the AC IN~ socket on the back panel,  
and  
the wall outlet.  
L
L
Y
R
Pb/
Pr
R
R
SPEAKER  
8
L
VIDEO  
FM ANT.  
R
L
VIDEO  
AC IN  
Option 2: Connect through component  
video cables  
TV  
L
L
Y
R
Pb/Cb  
Pr/Cr  
R
R
SPEAKER  
8
L
VIEO  
FM ANT.  
Y
R
Pb/Cb  
Pr/Cr  
AC IN  
L
Connect a progressive scan TV through component video  
cables for higher quality video.  
11  
En  
04  
Getting started  
Chapter 4:  
Getting started  
Turning on  
Finding the correct video input  
channel  
Press STANDBY/ON.  
The product switches to the last selected source.  
1
Turn on the product.  
APS mode  
2
Press DISC USB on the remote control or  
/
After this product is kept inactive for 15 minutes, it  
automatically switches to the standby mode.  
INPUT repeatedly on the main unit to select the  
disc source.  
The clock is displayed.  
If the clock is not set, [--:--] blinks.  
Turn on the TV and switch to the correct video-in  
channel.  
How to turn off the APS mode:  
Note  
Press and hold to turn off the APS mode in the  
• See the user manual of your TV for how to switch between  
video-in channels.  
standby mode and [APS OFF] is displayed.  
If the APS mode is turned on again, Press and hold   
in the standby mode and [APS ON] is displayed.  
Note  
Selecting the correct TV system  
• When an iPod/iPhone is connected, the light of the main  
display stays on even if it automatically switches to the  
standby mode.  
This product is compatible with both NTSC and PAL. If the  
picture is abnormally displayed with the default setting, select  
a TV system that matches your TV. (Refer to “Setup” >  
>
[TV SYSTEM] for details)  
Setting the clock  
The product uses the 24-hour time format.  
Selecting a language for on-screen  
display  
1
In the standby mode, press and hold  
DISPLAY/CLOCK for 2 seconds.  
The hour digits blink.  
English, French, German, Italian, Spanish, and Dutch are the  
default language options for this setting. (See “Setup” >  
> [OSD LANGUAGE] for details)  
2
3
Press / to set the hour.  
Press DISPLAY/CLOCK again.  
The minute digits blink.  
4
5
Press / to set the minute.  
Press DISPLAY/CLOCK to confirm the setup.  
12  
En  
Playing  
05  
Chapter 5:  
Playing  
CAUTION  
Playing recorded files  
Risk of damage to the product. During playback, never  
move the unit.  
You can play DivX/MP3/WMA/JPEG files that are copied onto  
a CD-R/RW, or USB storage device.  
Never put any object other than a disc into the disc tray.  
Never look at the laser beam inside the product.  
Never play discs with accessories such as disc stabilizer  
rings or disc treatment sheets.  
Note  
You can only play DivX videos that are rented or  
purchased with DivX® registration code of this product.  
When [INVALID KEY] is displayed after an operation, it  
indicates that this operation is unavailable for the current  
media or at the current time.  
(See “Setup” >  
> [DIVX[R] VOD])  
Subtitle files with the following file extensions (.srt, .smi,  
.sub, .ssa, .ass) are supported but not displayed in the  
file list.  
The subtitle filename has to be the same as the filename  
of the DivX video (the file extension excluded).  
The DivX video file and the subtitle files must be saved  
under the same directory.  
Basic operation  
The listed operations are applicable for all supported media.  
Function  
Action  
1
Select a source.  
Stop playback.  
Press .  
Press DISC/USB to select [DISC] or [USB].  
Pause or resume playback.  
Press .  
Press /.  
2
Insert the USB storage device or disc.  
Skip to the previous/next title,  
chapter, track, or file.  
The product starts playback automatically.  
The play interface is displayed.  
[C : ] 000001.MP3  
Playing a disc  
01.000001  
01.C:  
02.000002  
03.000003  
04.000004  
05.000005  
06.000006  
07.000007  
08.000008  
09.000009  
02.MP3  
03.WMA  
1
Press DISC/USB on the remote control or  
INPUT repeatedly on the main unit to select the  
disc source.  
2
3
Press  
to eject the disc tray.  
Place a disc onto the disc tray with the  
printed side upward, and then press  
.  
4
The product starts playback automatically.  
To start the playback manually, press .  
To play a DVD that has a rating level higher than your  
setting, enter the 4-digit password first. (Refer to “Setup”  
On the top: the name of current file and the name of  
current folder  
>
> [PASSWORD] and [RATING])  
On the left: the album list  
On the right: the file list  
At the bottom: the category icons  
for music  
for photos  
for videos  
13  
En  
05  
Playing  
Accessing a category  
Playing slideshow and music  
simultaneously  
1
Press  
(or  
) repeatedly until a category  
icon is highlighted.  
Note  
If there is no file under a certain category, the category  
icon can not be highlighted.  
Make sure that the USB storage device or the disc  
contains both WMA/MP3 files and JPEG photos.  
Depending on the recording condition, this may not  
operate.  
2
Press  
(or  
) to highlight the selected  
category icon.  
1
2
3
4
5
Play a WMA/MP3 file.  
Access the photo category.  
Access a photo album.  
Select a photo file.  
3
Press ENTER to confirm.  
The folders that contain the files of this category are listed.  
Accessing a folder  
1
Press  
repeatedly until a folder name is  
Press ENTER to start the slideshow.  
The slideshow stops after all photos are displayed for one  
time.  
highlighted.  
2
Press / to highlight the selected album  
To stop the slideshow, press .  
name.  
Note  
3
Press ENTER to confirm.  
This product can only display digital camera pictures  
with JPEG-EXIF format, which is widely used in digital  
cameras. It cannot display Motion JPEG, nor pictures in  
formats other than JPEG. Sound clips associated with  
pictures cannot be displayed either.  
If the JPEG photo is not recorded with an “exif” type file,  
it is displayed as a “blue mountain” thumbnail picture.  
The files of the selected category in the album are listed.  
Playing a file  
1
2
3
Access the selected album.  
Press to highlight a file name.  
Press / to highlight the selected file  
name.  
4
Press ENTER to confirm.  
The selected file starts playback.  
The product stops playback automatically at the end of  
the last file of same category. (DivX files, however, are  
not played successively.)  
14  
En  
Playing  
05  
Controlling playback  
Follow the instructions to control the playback.  
Media  
Function  
Action  
Return to the disc menu  
Press MENU.  
Displays the top menu  
Press TOP MENU.  
Press MENU repeatedly.  
Enable/disable the PBC (playback control) feature  
Enable PBC to display the PBC menu, and then  
use the numeric buttons to enter your choice.  
Select an audio language or audio channel  
Select a subtitle language  
Press AUDIO/PTY/ASPM repeatedly.  
Press SUBTITLE repeatedly.  
Select a camera angle  
Press ANGLE/PROG repeatedly.  
1
Select a play mode (repeat and random playback)  
Press MODE repeatedly.  
Repeat a specific section within a chapter or track  
1
Press REPEAT A-B to select the start  
point.  
2
Press REPEAT A-B again to select the  
end point.  
The selected section starts playback repeatedly.  
To resume normal playback, press REPEAT A-B  
until [A-B CANCEL] is displayed.  
Display the playback information  
Zoom in or out  
Press and hold DISPLAY/CLOCK.  
Press ZOOM repeatedly.  
To pan through an enlarged image, press //  
/.  
Slow down the playback  
Search backward or forward fast  
Preview photos  
Press repeatedly to select a playback speed.  
Press and hold  /  to select a speed.  
Press / to highlight a file name in the file list.  
Press ///.  
Rotate a photo  
1. Depending on the disc or source, this may not operate.  
15  
En  
05  
Playing  
6
Press  
to start playback.  
Only audio files within the same source can be  
programmed.  
Searching by time or title/chapter/  
track number  
If you press REPEAT during programmed playback, the  
current track or all programmed tracks/files is/are  
played repeatedly. The [REPEAT] and [PROG.] icons  
appear on the main display.  
1
During playback, press GOTO  
.
2
Press / to highlight the title number,  
The program is automatically cleared as soon as the disc  
tray is opened.  
chapter number, track number, or time field.  
Use the numeric buttons to enter the  
3
number or time digits.  
Adjusting sound  
4
Press ENTER to confirm.  
You can adjust the volume level and select sound effects.  
Playback starts automatically.  
Depending on the disc or source, this may not operate.  
Function  
Action  
Increase/decrease the Turn the volume knob towards VOLUME  
volume level  
(on main unit) or press VOL +/– (on  
remote control) to increase or decrease  
the volume.  
When the power is turned off (to the  
standby mode) with the volume set high,  
the volume is set to a moderate level  
when the power is turned back on.  
Program play  
You can program the playback order on the TV screen.  
Program play is not possible when the input source is a  
DVD.  
1
2
Press  
to stop playback.  
Select a preset sound Press EQ repeatedly.  
effect (ROCK, JAZZ,  
POP and CLASSIC)  
Press PROG to enter the program setting  
mode.  
Enable/disable the  
P.BASS feature  
Press P.BASS.  
Mute/unmute the  
speakers  
Press MUTE.  
3
Press /// to select a number in the  
program.  
4
Use the numeric buttons to select the  
desired track/file.  
5
Repeat steps 3 to 4 to select and store other  
desired tracks/files in this way.  
You can select up to 16 tracks/files.  
To erase the entire program, then select [CLEAR], and  
press ENTER.  
16  
En  
Other features  
06  
Chapter 6:  
Other features  
Charge the iPod/iPhone  
When the product is connected to power, the docked iPod/  
iPhone starts charging.  
Playing iPod/iPhone  
You can enjoy audio from iPod/iPhone through this product.  
Note  
Remove the iPod/iPhone  
The audio is only output through the supplied speakers.  
The peak current through the dock connector is limited  
as 1,000 mA for iPod/iPhone. To avoid damage to your  
iPod/iPhone and this product, securely load your iPod/  
iPhone as indicated.  
1
2
Unload the iPod/iPhone from the dock.  
Attach the terminal cover to the dock.  
Load the iPod/iPhone  
Listening to the FM radio  
1
2
Remove the terminal cover from the dock.  
Load the iPod/iPhone onto the dock.  
Note  
Up to 20 radio stations can be stored.  
Fully extend the FM antenna for better reception.  
Program radio stations  
1
Press TUNER.  
2
Press / repeatedly to tune to a radio  
station.  
3
Press ANGLE/PROG.  
The sequence number blinks.  
4
Press / to allocate a sequence number  
from 01 to 20 to this radio station.  
5
Press ANGLE/PROG to confirm.  
The sequence number and the current frequency are  
displayed.  
6
Repeat steps 2-5 to program more stations.  
Note  
To overwrite a programmed station, store another  
station with its sequence number.  
Listen to the iPod/iPhone  
1
2
Load your iPod/iPhone.  
Tune to a programmed radio station  
Play the selected track on your iPod/iPhone.  
To pause/resume the playback, press .  
To skip to the previous/next audio track, press /.  
To select a track from the playlist: press MENU to access  
the playlist, press / to select a track, and then press  
ENTER to confirm.  
1
Press TUNER  
.
2
Press / repeatedly to select a  
programmed radio station.  
17  
En  
06  
Other features  
Displaying RDS information  
Playing audio from an external  
device  
RDS (Radio Data System) is a service that allows FM stations  
to show additional information. If you tune to an RDS radio  
station, [RDS] and the station name are displayed.  
You can use this product to play audio from an external  
device.  
1
2
Tune to an RDS radio station.  
1
Connect the stereo mini-plug cable to  
the AUX IN jack of this product  
the audio output jack (usually headphone jack) of the  
external device.  
Press RDS repeatedly to scroll through the  
available information:  
Station name  
Program type such as [NEWS] (news), [SPORT] (sport),  
[POP M] (pop music)...  
Text messages  
2
3
Press AUX  
.
Play the external device (see the user’s  
Frequency  
manual of this device for details).  
Searching for RDS programs  
Listening through the headphones  
You can search for a program type.  
Plug your headphones into the PHONES socket on the front  
panel of the main unit.  
1
Press PTY/ASPM.  
[SEARCH] appears in the display.  
Note  
• No audio output from the headphones socket when you  
listen to the docked iPod/iPhone. Listen through the  
speakers instead.  
2
Press / to select the program type you  
want to hear.  
3
Press PTY/ASPM to search for the program  
type.  
The product starts searching in the station presets.  
Turning on/off automatically  
If [NO FOUND] is displayed, it means the tuner couldn’t find  
that program type at the time of the search.  
You can set a time for automatic power on and off.  
Note  
• Make sure that you have set the clock before this setup.  
ASPM (Auto Station Program  
1
In standby mode, press and hold SLEEP/  
.
Memory)  
TIMER  
You can program up to 20 preset RDS stations.  
[TIMER ON] (time for auto power on) blinks.  
Press and hold PTY/ASPM.  
2
Press SLEEP/TIMER  
.
All the available RDS stations are programmed. (up to 20  
stations)  
The hour digits blink.  
3
4
Press  
/  
to set the hour.  
Press SLEEP/TIMER again.  
The minute digits blink.  
5
6
Press  
/
to set the minute.  
Press SLEEP/TIMER to confirm the time for  
auto power on.  
[TIMER ON] blinks.  
If you want to set the power-off time, press /to  
select [TIMER OFF] (time for auto power off), and then  
repeat steps 2-6.  
18  
En  
Other features  
06  
7
8
9
Press  
Press SLEEP/TIMER  
Select the input ([DISC], [USB], [iPod] or  
/
to select [SOURCE].  
.
[
FM]) by pressing INPUT on the main unit or one  
of the input function buttons on the remote  
control.  
For the tuner source, you still need to press /to  
select a programmed radio station.  
10 Press SLEEP/TIMER  
The clock time is displayed.  
.
To deactivate the timer, press SLEEP/TIMER again.  
The power cannot be turned on while the timer is being  
set. Finish setting the time, then turn on the power.  
Use the sleep timer  
The product can also turn off automatically after a preset  
period (15, 30, 45, 60, 90 minutes).  
1
During play, press SLEEP/TIMER repeatedly  
to select a period.  
[SLEEP] is displayed.  
2
To deactivate the sleep timer, press SLEEP/  
TIMER repeatedly until [SLEEP OFF] is displayed.  
19  
En  
07  
Setup  
Chapter 7:  
Setup  
Interface for setup menu  
System setup  
After you press SYSTEM MENU, the interface for the setup  
menu is displayed as follows.  
[TV SYSTEM]  
Select a TV system that matches your TV.  
[TV TYPE]  
79ꢀ6<67(0  
79ꢀ7<3(  
9,'(2  
Select a display ratio that matches your TV screen.  
6&5((1ꢀ 6$9(5  
3$66:25'  
5$7, 1*  
3,&785(ꢀ086,&  
'()$8/7  
[VIDEO]  
Select a video output mode.  
[INTERLACE-YUV] – Select this when your TV that does  
not support progressive video signals is connected to the  
COMPONENT VIDEO OUT terminals.  
On the top: Icons for main menus  
[P-SCAN YPBPR] – Select this when your TV supporting  
progressive video signals is connected to the  
COMPONENT VIDEO OUT terminals.  
for [SYSTEM SETUP] menu  
for [LANGUAGE SETUP] menu  
for [AUDIO SETUP] menu  
Note  
If the picture does not display after setting this to  
progressive, connect the TV to the composite terminal,  
display the setup menu, then set this back to interlace.  
for [DIGITAL SETUP] menu  
In the middle: Name of the current main menu  
On the left: Items under the current menu  
On the right: Setting options  
[SCREEN SAVER]  
Protect the TV screen from damage due to over exposure to  
static image.  
[ON] – Enable the screen saver.  
[OFF] – Disable the screen saver.  
Changing a setting  
[PASSWORD]  
Note  
Set a password to restrict the play of rated discs to children.  
The default password is “0000”. You can change the 4-digit  
password.  
If a menu item or setting option is grayed out, it means  
that the setting cannot be changed at the current state.  
1
Press SYSTEM MENU.  
To access another main menu, press / to select its  
icon.  
1
2
Press SYSTEM MENU  
.
Select > [PASSWORD], and then press  
ENTER  
.
2
3
Press / to select a menu item.  
3
Enter the current password with the  
Press ENTER  
.
numeric keys (0-9), and then press ENTER  
.
If a dialog box is displayed, follow the instructions to  
operate.  
If you forget the password, enter “0000”.  
Enter the new password.  
Press ENTER to confirm.  
4
5
4
5
Press / to select your setting option.  
Press ENTER to confirm.  
To exit the menu, press SYSTEM MENU.  
20  
En  
Setup  
07  
[RATING]  
Select a rating level to restrict the play of discs that are not  
suitable for children. To play a disc that has the rating level  
higher than your setting, you must enter the 4-digit password.  
Audio setup  
[DOWNMIX]  
These discs must be recorded with rating levels.  
Compress multi-channel Dolby digital sound to 2-channel  
surround sound ([LT/RT]) or stereophonic sound ([STEREO]).  
[PICTURE MUSIC]  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
The product can play a slideshow and music simultaneously.  
[ON] – Enable this feature.  
[OFF] – Disable this feature.  
[DEFAULT]  
Digital setup  
Resets all the contents of the setup menu other than the  
[PASSWORD] and [RATING] settings to the factory defaults.  
[NIGHT MODE]  
Equalize loud sound and soft sound. Enable this feature to  
watch DVD movies at a low volume at night.  
Language setup  
[DYNAMIC RANGE]  
[OSD LANGUAGE]  
Set a dynamic range for sound output.  
Select a language for on-screen-display messages.  
[MENU LANG]  
Select a language for disc menu.  
[AUDIO LANG]  
Play a multilingual DVD disc, press the arrow keys to select  
your desired “audio language”.  
[SUBTITLE LANG]  
Play DVD discs with multi-subtitles, press the arrow keys to  
select your desired “subtitle language”.  
[DIVX[R] VOD]  
Display the DivX® registration code (behind [REGISTER  
CODE]).  
Note  
and rent or purchase DivX videos.  
DivX videos rented or purchased with this registration  
code can be played only on this product.  
21  
En  
08  
Additional information  
Chapter 8:  
Additional information  
This product can play Super VCDs, but some functions  
will not work.  
Types of playable discs  
This product can play back DVD-R and DVD-RW discs  
recorded in the DVD VIDEO format and DVD+R and  
DVD+RW discs, but depending on the recording unit,  
the disc manufacturer, etc., playback sometimes may  
not be possible.  
The DVD player can play back discs bearing any of the  
following marks:  
Disc type  
Disc contents  
This product may also be incapable of playing certain  
CD-R/RW discs depending on their properties, recording  
conditions, etc.  
This product cannot play back discs compatible with  
CPRM. CPRM is the abbreviation of Content Protection  
for Recordable Media, and it is a technique for copyright  
protection for recording media.  
Some operations may not be performed depending on  
discs even if they are described in this manual.  
For unplayable discs, see page 23.  
DVD Video Disc  
Audio and video (movies)  
Super Video CD  
Audio and video (movies)  
Audio and video (movies)  
Types of playable DVD discs vary depending on the region.  
This product can play back only DVDs with the same region  
number are written on the back of the unit.  
Video CD  
Audio CD  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Audio  
ABOUT DIVX VIDEO: DivX® is a digital video format created  
by DivX, LLC, a subsidiary of Rovi Corporation. This is an  
official DivX Certified® device that plays DivX video. Visit  
divx.com for more information and software tools to convert  
your files into DivX videos.  
1
Audio and picture  
CD-R/CD-RW  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®  
device must be registered in order to play purchased DivX  
Video-on-Demand (VOD) movies. To obtain your registration  
code, locate the DivX VOD section in your device setup menu.  
Go to vod.divx.com for more information on how to complete  
your registration.  
Or CD-R/CD-RW recorded in  
JPEG format  
2
(DivX® version cannot be upgraded on this product.)  
DivX® Video disc  
Audio and video (movies)  
Copyright Information  
Unauthorized copying, broadcast, public display,  
transmission, public performance and rental (regardless  
of whether or not such activities are for profit) of disc  
contents are prohibited by law.  
1. The CD-R/CD-RW may not be played back properly depending on  
the recording equipment or the disc.  
2. JPEG or JPG picture discs also play on this product. However,  
pictures may not be clear (depends on resolution and recording  
method).  
This product is equipped with copy protection  
technology that causes substantial degradation of  
images when the contents of a disc are copied to a  
videotape.  
This item incorporates copy protection technology that is  
protected by U.S. patents and other intellectual property rights of  
Rovi Corporation. Reverse engineering and disassembly are  
prohibited.  
22  
En  
Additional information  
08  
Discs that cannot be played  
USB playability information  
DVDs without the region number on the disc.  
DVDs with SECAM system  
DVD-ROM  
DVD-RAM  
DVD-Audio  
Blu-ray disc  
HD DVD  
CDG  
CDV  
Compatible USB devices:  
USB flash memory (USB1.1/2.0 Full Speed)  
USB flash players (USB1.1/2.0 Full Speed)  
Memory cards (an additional card reader is required)  
Supported formats:  
USB or memory file format FAT12, FAT16, FAT32 (sector  
size: 512 bytes)  
MP3 Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz  
MP3 file extension: .mp3  
MP3 bitrates (data rates): 32 kbps to 320 kbps and  
variable bitrates  
CD-ROM  
SACD  
Discs recorded in special formats, etc.  
The discs above cannot be played at all, or no sound is heard  
although images appear on the screen or vice versa.  
WMA Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz  
WMA bitrates: Up to 192 kbps  
WMA file extension: .wma  
Incorrect operation may damage the speakers and can have  
a negative effect on your hearing when played at high volume  
settings.  
WMA v9 or earlier  
Windows Media is either a registered trademark or  
trademark of Microsoft Corporation in the United States  
and/or other countries.  
This product includes technology owned by Microsoft  
Corporation and cannot be used or distributed without a  
license from Microsoft Licensing, Inc.  
You cannot play illegally produced discs.  
Note  
• A disc which has scratches or fingerprints may not play  
properly.  
Directory nesting up to 8 levels  
• Do not play the discs of special shapes (heart or octagon  
shaped) as they can be ejected whilst rotating and cause  
injury.  
Number of albums/folders: maximum 99  
Number of tracks/files: maximum 999 (depending on file  
name length)  
ID3 tag v2.0 or later (Only English letters and numbers  
are supported.)  
DivX  
DivX®, DivX Certified® and associated logos are  
trademarks of Rovi Corporation or its subsidiaries and  
are used under license.  
File name in Unicode UTF8 (maximum length: 16 bytes)  
Audio files cannot be played depending on the encoding  
software settings, USB device type, recording, other  
conditions.  
Unsupported formats:  
Empty albums: an album that does not contain MP3/  
WMA files  
Unsupported file formats are skipped. For example,  
Word documents (.doc) or MP3 files with extension.dlf  
are ignored and not played.  
AAC, WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac)  
WMA files in Lossless format  
Supported MP3/WMA in the disc  
ISO9660, Joliet  
Other specifications are same as USB playability  
information.  
Audio files cannot be played depending on the encoding  
software settings, USB device type, recording, other  
conditions.  
23  
En  
08  
Additional information  
RDS program types  
NO TYPE  
NEWS  
No RDS programme type  
News services  
AFFAIRS  
INFO  
Politics and current affairs  
Special information programs  
Sports  
SPORT  
EDUCATE  
DRAMA  
CULTURE  
SCIENCE  
VARIED  
Education and advanced training  
Radio plays and literature  
Culture, religion and society  
Science  
Entertainment programs  
Pop music  
POP M  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
Rock music  
Light music  
Light classical music  
Classical music  
Special music programs  
Weather  
Finance  
Children’s programs  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
Social Affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Documentary  
Alarm Test  
Alarm  
COUNTRY  
NATION M  
OLDIES  
FOLK M  
DOCUMENT  
TES  
ALARM  
24  
En  
Additional information  
Troubleshooting  
08  
WARNING  
• Never remove the casing of this apparatus.  
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component,  
check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical  
appliances being used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer  
authorized service center or your dealer to carry out repair work.  
If the product does not operate normally due to external effects such as static electricity, disconnect the power plug from the  
outlet and insert it again to return to normal operating conditions  
.
Problem  
Solution  
No power  
Ensure that the AC cord of the apparatus is connected properly.  
Ensure that there is power at the AC outlet.  
As a power-saving feature, the system switches off automatically 15 minutes after track play  
reaches the end and no control is operated.  
No disc detected  
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at the lens has cleared.  
Replace or clean the disc.  
Use a finalized CD or correct format disc.  
No picture  
Check the video connection.  
Turn on the TV to the correct Video-In channel.  
Progressive scan is activated but the TV does not support progressive scan.  
The disc does not match the TV color system standard (PAL/NTSC).  
Sometimes a slight picture distortion may appear. This is not a malfunction.  
Clean the disc.  
Black and white or distorted picture  
A distorted picture may appear during progressive scan setup.  
The aspect ratio of the TV screen cannot The aspect ratio is fixed on the loaded DVD disc.  
be changed even though you have set the  
The aspect ratio may not be changed for some TV systems.  
TV display format  
Please check the instruction manual of your TV and set correct aspect in TV side (WIDE/  
ZOOM/MATCH/etc.).  
No sound or poor sound  
Adjust the volume.  
Disconnect the headphones.  
Check that the speakers are connected correctly.  
Remote control does not work  
Before you press any function button, first select the correct source with the remote control  
instead of the main unit.  
Reduce the distance between the remote control and the product.  
Insert the battery with its polarities (+/– signs) aligned as indicated.  
Replace the battery.  
Aim the remote control directly at the sensor on the front of the product.  
25  
En  
08  
Additional information  
Problem  
Solution  
Disc does not play  
Insert a readable disc with the label side facing you.  
Check the disc type, color system and regional code. Check for any scratches or smudges on  
the disc.  
Press SYSTEM MENU to exit the system setup menu.  
Disable the password for parental control or change the rating level.  
Moisture has condensed inside the system. Remove the disc and leave the system turned on  
for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system  
again.  
As a power-saving feature, the system turns off automatically 15 minutes after disc play  
reaches the end and no control is operated.  
DivX video files cannot be played  
Poor radio reception  
Make sure that the DivX video file is complete.  
Make sure that the file extension is correct.  
Increase the distance between the apparatus and your TV or VCR.  
Fully extend the FM antenna.  
Audio or subtitle languages cannot be set The disc is not recorded with sound or subtitles in multiple languages.  
The audio or subtitle language setting is prohibited on the disc.  
Cannot display some files in USB device The number of folders or files in the USB device has exceeded a certain limit. This  
phenomenon is not a malfunction.  
The formats of these files are not supported.  
USB device not supported  
Timer does not work  
The USB storage device is incompatible with the product. Try another one.  
Set the clock correctly.  
Switch on the timer.  
Clock/timer setting erased  
Power has been interrupted or the power cord has been disconnected.  
Reset the clock/timer.  
iPod and iPhone  
Problem  
Solution  
No sound is produced  
The iPod or iPhone is not playing.  
The iPod or iPhone is not properly connected to the unit.  
Is the AC power lead of the unit plugged in?  
Audio from the iPod/iPhone cannot be heard via the headphones connected to the unit.  
The iPod or iPhone is not making full contact with the connector.  
The iPod or iPhone is not supported. Refer to page 5 for compatible models.  
iPod or iPhone will not charge  
“This accessory is not made to work with The iPhone battery is low. Please charge the iPhone.  
iPhone” or “This accessory is not  
iPhone is not properly docked.  
supported by iPhone” appears on iPhone  
screen  
26  
En  
Additional information  
08  
When using chemical-impregnated wipes, etc., read the  
cautions included with the wipes carefully.  
Cautions on use  
Cleaning the lens  
When moving this unit  
The lens of this unit should not become dirty in normal  
use, but if for some reason it should malfunction due to  
dust or dirt, consult your nearest Pioneer authorized  
service center. Although lens cleaners for players are  
commercially available, we advise against using them  
since some may damage the lens.  
When moving this unit, be sure to first check that there is no  
disc loaded and disconnect the iPod/iPhone. Then press  
STANDBY/ON, wait until [GOOD BYE] disappears on  
main display to turn off, and then unplug the power cord.  
Damage may occur if the unit is transported or moved with a  
disc inserted, or when another device is connected to the  
iPod/iPhone connector port, USB terminal, or AUX IN mini-  
plug jack.  
Handling discs  
Storing  
Place of installation  
Choose a stable place near the TV or stereo system being  
used with this unit.  
Always place discs in their cases and store them  
vertically, avoiding hot, humid places, places exposed to  
direct sunlight and extremely cold places.  
Do not place this unit on top of a TV or color monitor.  
Also, install it away from cassette decks and other  
devices easily affected by magnetic forces.  
Be sure to read the cautions included with the disc.  
Avoid the following locations:  
Places exposed to direct sunlight  
Cleaning discs  
Humid or poorly ventilated places  
Extremely hot places  
Places exposed to vibrations  
Places in which there is much dust or cigarette smoke  
Places exposed to soot, steam, or heat (kitchens, etc.)  
Discs may not play if there are fingerprints or dust on  
them. In this case, use a cleaning cloth, etc., to gently  
wipe the disc from the inside towards the outside. Do not  
use dirty cleaning cloths.  
Do not place objects on this unit  
Do not place any objects on top of this unit.  
Do not obstruct the ventilation holes.  
Do not use this unit on shaggy rugs, beds, sofas, etc., or  
wrapped in cloth, etc. Doing so will prevent the heat from  
dispersing, leading to damage.  
Do not use benzene, thinner or other volatile chemicals.  
Also, do not use record spray or antistatic agents.  
For tough dirt, apply some water to a soft cloth, wring out  
thoroughly, wipe off the dirt, and then wipe off the  
moisture with a dry cloth.  
Do not use damaged (cracked or warped) discs.  
Do not let the signal surface of discs get scratched or  
dirty.  
Do not attach pieces of paper or stickers to discs. Doing  
so could warp discs, making it impossible to play them.  
Also, note that rental discs often have labels attached to  
them, and the glue of the label may have oozed out.  
Check that there is no glue around the edges of such  
labels before using rented discs.  
Do not expose to heat.  
Do not place this unit on top of an amplifier or other  
components that generate heat. When rack mounting it, to  
avoid the heat given off by the amplifier or other audio  
components, place it on a shelf below the amplifier.  
Turn off the power of this unit when not using it.  
Depending on signal conditions, striped patterns may  
appear on a TV screen and noise may enter the sound of  
radio broadcasts when the power of this unit is on. If this  
happens, turn off the power of this unit.  
Cleaning the product  
Unplug the power cord from the power outlet when  
cleaning this unit.  
Clean this unit using a soft cloth. For tough dirt, apply  
some neutral detergent diluted in 5 to 6 parts water to a  
soft cloth, wring out thoroughly, wipe off the dirt, and  
then wipe again with a soft, dry cloth.  
Alcohol, thinner, benzene, insecticides, etc., could  
cause the print or paint to peel off. Also, leaving rubber  
or vinyl products in contact with this unit for long periods  
of time could mar the cabinet.  
27  
En  
08  
Additional information  
About specially shaped discs  
Specially shaped discs (heart-shaped, hexagonal, etc.)  
cannot be played on this unit. Do not attempt to play such  
discs, as they could damage this unit.  
Specifications  
Amplifier  
Rated Output Power  
. . . . . . . . . . . . . . . . . . . . 10 W + 10 W, RMS, 1 kHz, 8 Ω, 10%  
Disc  
Video Decoding. . . . . . . . . . . . . . . . . MPEG-1 / MPEG-2 / DivX  
Signal System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAL / NTSC  
Video Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 / 16:9  
About iPod/iPhone  
Tuner (FM)  
Tuning range. . . . . . . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz  
Speakers  
Speaker Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω  
Speaker Driver. . . . . . . . . . . . . . . . . . . . . 101.6 mm, Full range  
General information  
iPhone, iPod, iPod classic, iPod nano, and iPod touch are  
trademarks of Apple Inc., registered in the U.S. and other  
countries.  
AC power . . . . . . . . . . . . . . . . . . . . 220 V to 240 V, 50 Hz/60 Hz  
Operation power consumption . . . . . . . . . . . . . . . . . . . . .28 W  
Standby power consumption. . . . . . . . . . . . . . . . . . . . .0.6 W  
USB Direct . . . . . . . . . . . . . . . . . . . . USB 1.1/2.0 (Full Speed)  
Dimensions  
“Made for iPod” and “Made for iPhone” mean that an  
electronic accessory has been designed to connect  
specifically to iPod or iPhone, respectively, and has been  
certified by the developer to meet Apple performance  
standards. Apple is not responsible for the operation of this  
device or its compliance with safety and regulatory standards.  
Please note that the use of this accessory with iPod or iPhone  
may affect wireless performance.  
– Main unit (W x H x D) . . . . . . 152 mm x 175 mm x 215 mm  
– Speaker box (W x H x D) . . . . 135 mm x 175 mm x 198 mm  
Weight  
– Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.36 kg  
– Speaker box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.33 kg x 2  
Note  
• The specifications and design of this product are subject to  
change without notice.  
• Corporation and product names mentioned herein are  
trademarks or registered trademarks of the respective  
corporations.  
© 2012 PIONEER CORPORATION.  
All rights reserved.  
28  
En  
Additional information  
08  
29  
En  
© 2012 PIONEER CORPORATION.  
All rights reserved.  
© 2012 PIONEER CORPORATION.  
Tous droits de reproduction et de traduction réservés.  
PIONEER CORPORATION  
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270  
K002_B3_En  
Printed in China / Imprimé en Chine  
<601-EM2100-030>  

Radio Shack Vu Qube V10 User Manual
Philips 190CW8 User Manual
Nexus 21 Boating Equipment Depth TH 52 User Manual
Motorola H715 User Manual
Metz SCA 3202 M User Manual
Lochinvar COPPER FIN CB 0495 User Manual
Kenwood KDC HD545U User Manual
JVC LYT1193 001A User Manual
JVC KS FX280 User Manual
JVC KD R400 User Manual