Altec Lansing Speaker VS2320 User Manual

Users guide  
 
The lightning flash with arrowhead, within an  
Caution: To prevent the risk of electric shock, do not  
remove cover (or back). No user- serviceable parts  
inside. Refer servicing to qualified service personnel.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated “dangerous voltage” within the  
products enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
Al t e c La n s i n g Te c h n o l o g i e s , In c . O n e Ye a r  
Li m i t e d Wa r r a n t y  
C AUTIO N  
(Tw o -Ye a r Li m i t e d Wa r r a n t y In Th e Eu r o p e a n Un i o n  
a n d As i a )  
To prevent electric shock do not use this (polarized) plug with an  
extension cord, receptacle or other outlet unless the blades can be fully  
inserted to prevent blade exposure.  
What Does The Warranty Cover?: Altec Lansing warrants that its products shall be  
free from defects in materials or workmanship, with the exceptions stated below.  
What Is The Period Of Coverage?: For units purchased in European Union or  
Asia, this warranty runs for two years from the date of purchase. For units not  
purchased in Europe or Asia, this warranty runs for one year from the date of  
purchase. The term of any warranties implied by law shall expire when your  
limited warranty expires. Some states and/or Member States in the European  
Union do not allow limitations on how long an implied warranty lasts, so the  
above limitation may not apply to you.  
WARN IN G  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE.  
What Does The Warranty Not Cover?: This warranty does not cover any defect,  
malfunction or failure that occurs as a result of: improper installation; misuse or  
failure to follow the product directions; abuse; or use with improper, unintended  
or faulty equipment. (For information on proper installation, operation and use  
consult the manual supplied with the product. If you require a replacement  
manual, you may download a manual from w w w.alteclansing.com.) Also,  
consequential and incidental damages are not recoverable under this warranty.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitation or exclusion may not apply to you.  
Co n n e c t i n g t h e Po w e r Co r d (AC Wa l l So c k e t )  
Long slot is neutral  
(ground) side.  
Insert the wide blade into  
the ground side slot.  
What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its  
option, repair or replace any product that proves to be defective in material or  
workmanship. If your product is no longer being manufactured, or is out of  
stock, at its option, Altec Lansing may replace your product with a similar or  
better Altec Lansing product.  
Im p o r t a n t Sa f e t y In s t r u c t i o n s  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
How To Get Warranty Service: To get a covered product repaired or replaced,  
you must contact Altec Lansing during the warranty period by email  
(csupport@alteclansing.com). You must include in your email, your name, address,  
email address, telephone number, date of purchase and a complete description  
of the problem you are experiencing. In the United States, you may alternatively  
contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to  
provide the same information. If the problem appears to be related to a defect in  
material or workmanship, Altec Lansing will provide you a return authorization  
and instructions for return shipment. Return shipments shall be at the customers  
expense, and the return must be accompanied by the original proof of purchase.  
You should insure the shipment as appropriate because you are responsible for  
the product until it arrives at Altec Lansing.  
4. Follow all instructions.  
5. Do not use this apparatus near water — This apparatus shall not be exposed  
to dripping or splashing, and no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturers instructions. The apparatus should not be situated on a bed,  
sofa, rug or similar surface that may block the ventilation openings. The  
apparatus must not be placed in a built-in installation, such as a closed  
bookcase or cabinet that may impede the flow of air through the ventilation  
openings. Ventilation should not be impeded by covering the openings with  
items such as newspapers, tablecloths, curtains, etc.  
How Will State Law Affect Your Rights?: This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state. Please  
note that in the European Union, you as a consumer might have other legal  
rights under national legislation of European Union Member States governing  
the sale of Altec Lansings goods. Those rights are not affected by this guarantee.  
8. Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
The above limited warranties and remedies are sole warranties and remedies  
available to purchaser, if, and to the extent, valid and enforceable under the  
applicable law.  
9. No naked flame sources, such as lighted candles, should be placed on  
the apparatus.  
10. Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If the provided plug  
does not fit into your outlet, consult an electrician for the replacement of  
the obsolete outlet.  
Cu s t o m e r Se r v i c e  
The answers to most setup and performance questions can be found in the  
Troubleshooting guide. You can also consult the FAQs in the customer support  
section of our Web site at w w w.alteclansing.com. If you live in North America  
and still cant find the information you need, please call our customer service  
team for assistance before returning the speakers to your retailer under their  
return policy.  
11. Protect the power cord from being walked on or pinched — particularly  
at plugs, convenience receptacles, and the point where they exit from  
the apparatus.  
12. Do not install in an area which impedes the access to the power plug.  
Disconnecting the power plug is the only way to completely remove power  
to the product and must be readily accessible at all times.  
Tel: 800-258-3288  
Email: csupport@alteclansing.com  
If you live outside of North America, please visit our website at  
w w w.alteclansing.com and select your region to locate your countrys distributor.  
13. Power source — Use only power supplies of the type specified in the  
operating instructions or as marked on the appliance. If a separate power  
supply is included with this apparatus, do not substitute with any other  
power supply — use only manufacturer-provided power supplies.  
For the most up-to-date information, be sure to check our Web site at  
w w w.alteclansing.com.  
14. Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
In t e r n a t i o n a l D i s t r i b u t i o n  
15. Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped. For service, refer to qualified service  
personnel, return to the dealer, or call the Altec Lansing service line for  
assistance.  
International customers: For information regarding the distribution of Altec  
Lansing products in your country, please visit w w w.alteclansing.com and click on  
your region.  
1
 
Co n s o l e G a m i n g  
(Requires the use of the Console Gaming Y-Adapter, which is not included. This  
adapter can be purchased at w w w.alteclansing.com.)  
VS2320  
Most console game systems feature dual-RCA outputs. To connect your speakers,  
follow the steps below:  
Tw o -Pi e c e Po w e r e d Au d i o Sy s t e m  
1. Make sure the power to your console gaming system is turned off.  
Thank you for purchasing this Altec Lansing product. For generations, Altec  
Lansing has been first in audio innovation. Today, our line of powered speakers  
has received more performance awards than any other brand. In all kinds of  
environments, in every price range, Altec Lansing offers sound of distinction —  
giving even the most demanding customers the audio enjoyment they seek. Just  
listen to this!  
2. The Console Gaming Y-Adapter has a lime green 3.5 mm stereo jack on one end  
and two RCA jacks on the other?one red and one white.  
3. Locate the red and white RCA plugs on the end of the cable connected to the  
back of your console gaming system. Connect them to the matching red and  
white RCA jacks on the Console Gaming Y-Adapter.  
4. Connect the lime green 3.5mm stereo cable (hardwired into the right satellite)  
to the lime green input on the Console Gaming Y-Adapter.  
Bo x Co n t e n t s  
Two speakers  
Po r t a b l e Au d i o D e v i c e s (MP3, Po r t a b l e CD Pl a y e r s , e t c .)  
• Color-coded cables  
Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to  
the headphone jack on your portable audio device.  
• Users guide  
• Quick connect instructions (located on inner-flap of the package)  
PO WERIN G O N  
Pl a c i n g Sp e a k e r s  
Sa t e l l i t e Sp e a k e r s  
1. After all other connections are made, plug the AC power cord into a wall  
outlet. The speaker system is now ready to operate.  
Arrange the satellite speakers to suit your listening tastes — from right next to  
the monitor to as far apart as the speaker cords allow.  
2. Turn on the audio source.  
3. Turn on the speaker system by turning the master volume knob on the right  
satellite until you hear a click sound. An LED will light on the front of the right  
satellite when the power is ON.  
For optimum sound, satellite speakers should be placed in a left/right  
configuration, preferably apart and at equal distance from the center of the  
listening area. This will offer the best stereo imaging and provide the most  
satisfying results.  
Note: To avoid hearing a popping sound when you turn on your Altec Lansing  
speaker system, always turn on your audio source first.  
Note: The satellite speakers ARE magnetically shielded and can be placed close to  
video displays such as TVs and computer monitors without distorting the image.  
Vo l u m e  
The VOLUME knob on the right satellite controls the master volume. Turn the  
knob clockwise to increase the volume and counterclockwise to decrease the  
volume.  
M a k i n g Co n n e c t i o n s  
Warning: Do not insert the speaker systems power plug into a wall outlet until  
all connections are made. Also, turn off audio source (i.e., your PC, MP3 player,  
Sony PlayStation, etc.) before connecting the outputs to the speaker systems  
inputs.  
To n e Co n t r o l  
The second knob on the right satellite controls tone. Turn the knob clockwise to  
increase treble and counterclockwise to decrease treble.  
To ensure first-time operation as expected, please carefully follow the connection  
sequences described below in the order indicated.  
H e a d p h o n e s  
In p u t s  
Various connection schemes between your audio source and the speaker system  
are available. Determine if youll be setting up the speaker system for PC  
audio/PC gaming, DVD playback, console gaming or with portable audio devices  
(such as MP3 or portable CD players), then skip to the appropriate section.  
To use headphones with the system, plug them into the labeled  
right satellite. When headphones are connected, the speaker system is muted.  
jack on the  
Au x i l i a r y In p u t  
PC Au d i o / PC G a m i n g / D VD Pl a y b a c k  
This auxiliary or secondary input is located on the front of the right satellite.  
Use it to connect any additional stereo audio source that has a line-out jack or  
a 3.5mm headphone jack, such as an MP3 player, a CD player, or a laptop. A  
line-out jack will ensure that the output is not amplified. Check the owners  
manual for your audio device for more information.  
All PC sound cards have audio outputs. Typically, the outputs will be marked as  
“front output” and “rear output.” In some cases, slightly different terminology  
may be used. The sound cards documentation should help you determine which  
outputs to use with your speaker system.  
If the audio source features a 3.5mm headphone jack, follow the steps below:  
• Set the volume on the audio source at mid-level.  
Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to  
the lime green input labeled “FRONT” on your sound card.  
• Set the volume on the speaker system at minimum level and adjust upward to a  
comfortable listening level.  
If the audio source features red and white RCA jacks, you will need a cable that  
has RCA plugs on one end and a 3.5 mm stereo male plug on the other. This type  
of cable may be purchased at most electronics stores.  
Sy s t e m Sp e c i f i c a t i o n s *  
Altec Lansings superior sound comes from our patented Dynamic EQ technology, which utilizes custom-built, high-fidelity drivers, state-of-the-art equalization  
circuitry, and a harmonious mix of the following specifications:  
Sound Pressure Level (SPL):  
Total Continuous Power:  
• Front Speakers:  
89 dB  
Frequency Response:  
85 Hz – 18 kHz (-10 dB)  
5 Watts RMS  
Signal to Noise Ratio  
@ 1 kHz input:  
> 70 dB  
2.5 Watts/channel @ 4 ohms  
@ 10% THD @ 20 Hz – 20 kHz (-3 dB)  
2 Channels Loaded  
Drivers (per satellite):  
One 3" full-range driver  
*Power rating conforms to FTC Amplifier Rule #16 C.F.R. Part 432.  
 
2
Tr o u b l e s h o o t i n g  
Sy m p t o m  
Po s s i b l e Pr o b l e m  
So l u t i o n  
Turn the VOLUME knob on the right speaker until you hear a click sound. An  
LED will light next to the knob when the power is ON.  
No LEDs are lit.  
Power isnt turned on.  
Check to see if the “Power On” LED is illuminated on the right satellite. If not,  
connect the AC power cord.  
AC power cord isnt connected to the wall outlet.  
Surge protector (if used) isnt powered on.  
Wall outlet not functioning.  
If the AC power cord is plugged into a surge protector, make sure the surge  
protector is switched on.  
Plug another device into the wall outlet (same jack) to verify the wall outlet  
is working.  
Verify the AC power cord is plugged into the wall outlet.  
No sound  
Power isnt turned on.  
from one or  
more speakers.  
Turn the VOLUME knob on the right speaker until you hear a click sound. An  
LED will light next to the knob when the power is ON.  
Turn the VOLUME knob clockwise to raise the volume.  
Volume is set too low.  
Check volume level on the computer sound card or alternate audio source  
device, and set at mid-level.  
Check plug connections on the audio source. Make sure the signal cables are  
inserted firmly into the correct jacks.  
3.5mm stereo cable isnt connected to audio source.  
Make sure the 3.5mm stereo cable is connected and fully inserted into the  
line-out,” “audio-out,” or the headphone jack of the audio source.  
3.5mm stereo cable is connected to wrong output on  
audio source.  
Test the speakers on another audio device. Remove the 3.5mm stereo cable  
from the audio source device and connect it to “line-out,” “audio-out,” or the  
headphone jack of another audio source.  
Problem with audio source device.  
Check all cables. Make sure they are connected to “line-out” or “audio-out”  
jack on your sound card or other audio source — NOT speaker-out.”  
Crackling sound  
from speakers.  
Bad connection.  
Check the computer operating system volume level and decrease it if necessary.  
Volume level in computer operating system is set too  
high.  
Unplug the stereo cable from the audio source. Then plug it into the  
headphone jack of an alternate audio source (e.g., Walkman, Discman or  
FM radio).  
A problem with your audio source device.  
Turn the VOLUME knob counterclockwise to lower the volume.  
Sound is  
Volume level set too high.  
distorted.  
Adjust the computer operating system volume and balance levels to the center  
as a starting point, then adjust the level on the speaker using the volume  
control.  
Computer operating system volume level is set too  
high.  
WAV files are often of poor quality. So distortion and noise are easily noticed  
with high-powered speakers. Try a different sound source such as a music CD.  
Sound source is distorted.  
Too close to a radio tower.  
Move your speakers until the interference goes away.  
Radio  
interference.  
3
 
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien.  
Corporate Headquarters  
Asia/Pacific  
535 Rte. 6 & 209, Milford, PA 18337-0277, USA  
25 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong  
US VS2320 MAN R01  
866-570-5702 • 570-296-4434 • Fax 570-296-6887 (852) 2735-7331 • Fax (852) 2317-7937  
 

3M Sander 51210 User Manual
Abocom Network Card SAS2800 User Manual
Aiwa DVD Player XD DV380U User Manual
Allied Telesis Network Router CG WLBARGS User Manual
Alto Shaam Kitchen Entertainment Center 500 s User Manual
Amana Clothes Dryer NED7200TW10 User Manual
Ativa Paper Shredder 505SB User Manual
ATN Binoculars ATN MArs x4 User Manual
Beko Microwave Oven MWB 2510 EX User Manual
Beko Refrigerator CDA671F User Manual