Bosch Appliances Wireless Office Headset ISW EN4216R User Manual

Intrusion Systems | Commercial Wireless ISW‑EN4216R LCD Receiver  
Commercial Wireless ISW‑EN4216R LCD  
Receiver  
Monitors up to 16 transmitters or repeaters  
Text display (LCD)  
Cost-effective solution for small systems  
Flexible alarm and fault output  
Wireless registration  
Compatible with a variety of transmitters and control  
panels  
Secure wireless implementation  
Exclusive wireless protocol ensures maximum  
performance and reliability  
Wireless 900 MHz Band  
The ISW‑EN4216R LCD Receiver integrates up to sixteen  
900 MHz wireless transmitters into any application. The  
Commercial Wireless platform uses diversity reception and  
advanced signal processing to reduce dead spots in  
transmission areas. The liquid crystal display (LCD) allows  
the user to view the current status of all transmitters and  
view the history of events. Each receiver stores up to 50  
events. The receiver provides versatile options for adding  
high performance wireless to an installation.  
The Commercial Wireless platform sends redundant  
information on several multi-frequency channels within the  
FCC Part 15 900 MHz band, providing superior range and  
reliability. In comparison, systems that use a single  
frequency technology can only send information on one  
narrow band channel. Any interference within the band can  
cause missed signals. With wireless registration, it is easy  
to add this technology to any application.  
System Overview  
Functions  
Powered by Inovonics  
Flexible Outputs  
The Commercial Wireless platform, powered by Inovonics  
wireless mesh network technology, ensures superior range,  
reliability, and scalability for commercial applications.  
Using a wide range of transmitters and repeaters, this  
proven technology provides flexibility and performance to  
meet the most stringent requirements. This exclusive  
protocol is available only on Commercial Wireless products.  
Transmitters and repeater faults and alarms map to any of  
the receiver models.  
Wireless Registration  
There is no external programmer required. The transmitter  
is enrolled using a wireless programming routine built into  
the receiver. Wireless registration reduces installation time.  
Secure Wireless Implementation  
Jam detection monitors all channels for the presence of  
interference for more than 20 sec. A reset terminal is inside  
the receiver, allowing the receiver to accept external reset  
signals. The receiver includes a case tamper and internal  
antennas for added security.  
 
Commercial Wireless ISW‑EN4216R LCD Receiver | 3  
Outputs  
Rating:  
Types:  
1 A, 28 VDC, or 0.5 A, 30 VAC (resistive)  
Six on‑board Form C relays for con-  
necting to any control panel or for  
stand-alone wireless applications (NO  
or NC)  
One NO Receiver case tamper contact  
closure  
One NC Receiver jam input indication  
Reception Characteristics  
Frequency Compatibility:  
Transmitters:  
902 MHz to 928 MHz  
Supports up to 16  
Trademarks  
Trademark names are used throughout this document. In  
most cases, these designations are claimed as trademarks  
or registered trademarks in one or more countries by their  
respective owners. Rather than placing a trademark symbol  
in every occurrence of a trademark name, Bosch Security  
Systems, Inc. uses the names only in an editorial fashion  
and to the benefit of the trademark owner with no intention  
of infringing the trademark.  
Inovonics is a trademark of Inovonics Wireless Corporation.  
Ordering Information  
Commercial Wireless ISW‑EN4216R LCD  
Receiver  
ISW-EN4216R  
Monitors up to sixteen wireless transmitters or  
repeaters  
 
4 | Commercial Wireless ISW‑EN4216R LCD Receiver  
Americas:  
Europe, Middle East, Africa:  
Bosch Security Systems B.V.  
P.O. Box 80002  
5600 JB Eindhoven, The Netherlands  
Phone: + 31 40 2577 284  
Fax: +31 40 2577 330  
Asia-Pacific:  
Robert Bosch (SEA) Pte Ltd, Security Systems  
11 Bishan Street 21  
Singapore 573943  
Phone: +65 6258 5511  
Represented by  
Bosch Security Systems, Inc.  
130 Perinton Parkway  
Fairport, New York, 14450, USA  
Phone: +1 800 289 0096  
Fax: +1 585 223 9180  
Fax: +65 6571 2698  
© Bosch Security Systems Inc. 2010 | Data subject to change without notice  
T6054672523 | Cur: en-US, V4, 2 Jul 2010  
 

Beyerdynamic Microphone SHM 201 215 User Manual
Blackberry Cell Phone 8830 User Manual
Blaupunkt Car Video System IVSC 5501 User Manual
Brother Printer DCP J140W User Manual
Bryant Heating System 39004DP230 User Manual
Canon Games BJ BJ139 User Manual
Carrier Air Conditioner 40RM007 034 User Manual
Carson Car Stereo System SA 500 10 14V User Manual
Casio Printer KL 70E User Manual
Chicago Electric Battery Charger 68859 User Manual