SSFSDR-511
Combination Fire Smoke Dampers
Application
Round Stainless Steel Blade
Model SSFSDR-511 is a combination fire smoke damper constructed
out of 304 stainless steel with round style blades. The SSFSDR-511
has been qualified to 3000 fpm (15.2 m/s) and 4 in. wg (1 kPa) for
operation and dynamic closure in emergency fire smoke situations.
Model SSFSDR-511 may be installed vertically (with blades running
horizontal) or horizontally and is rated for airflow and leakage in
either direction.
UL 555S Leakage Class I
UL555 1 1/2 Hour Fire Resistance Rating
Model SSFSDR-511 meets the requirements for
fire dampers, smoke dampers and combination fire
smoke dampers established by:
Ratings
National Fire Protection Association
NFPA Standards 80, 90A, 92A, 92B, 101 & 105
IBC International Building Codes
New York City (MEA listing #260-91-M)
SBCCI Standard Building Codes
California State Fire Marshall
UL 555 Fire Resistance Rating
Fire Rating: 1 1/2 Hour
Dynamic Closure Rating: Actual ratings are size dependant
Maximum Velocity: 3000 fpm (15.2 m/s)
Maximum Pressure: 4 in. wg (1 kPa)
UL 555S Leakage Rating
Listing #: 3225-0981:112 (fire)
Listing #: 3230-0981:113 (smoke)
Leakage Class:
I
Operational Rating: Actual ratings are actuator dependant
Maximum Velocity: 3000 fpm (15.2 m/s)
Maximum Pressure: 4 in. wg (1 kPa)
Maximum Temperature: 350º F (177°C) —Depending on actuator
“UL CLASSIFIED (see complete marking on
product)”
“UL CLASSIFIED to Canadian safety standards
(see complete marking on product)”
Standard 555 (Listing #R13317)
Standard Construction
Frame/Sleeve: 20 ga. (1mm) 304 stainless steel integral
sleeve
Standard 555S (Listing #R13447)
Blades: Double skin 304 stainless steel (14 ga.
[2mm] equivalent) round style blades
Seals: Extruded silicone rubber blade seals
Linkage: 304 stainless steel - concealed in jamb
Axles: 1/2 in. (13mm) dia. 304 stainless steel
Bearings: 304 stainless steel sleeve type
Fusible Link: UL listed 165ºF (74ºC) -not 304SS
Size Limitations
Minimum Size: 6 in. (152mm) diameter
Maximum Size: 24 in. (610mm) diameter
Optional Features
• OCI (Open closed indication switches) -not 304SS
• 165º F (74°C), 212º F (100°C), and 350º F (177°C) RRL available - not
304SS.
• TOR (remote override of 165º F (74°C) closure allows damper to
perform smoke management functions during a fire emergency) -not
304SS.
D*
• Electric or pneumatic actuators to accomplish smoke management
and system functions.
* Dimensions furnished approximately 1/8 in. (3mm) undersize.
• One retainer plate required, additional retainer plate available.
• 14 ga. (2mm) or 16 ga. (1.5mm) sleeve available
Opening + 2 in. Min.
Nut
Clamping
Minimum Wall/Floor Opening
Screw
Retaining
Plate Assembly
= Nominal Dia. + 7/8 in.
1.00 in. Min. Typ.
Clamping Screw
Fasteners
|
Grizzly Musical Instrument Amplifier H6015 User Manual
Grundig Car Stereo System UMS 4201 SPCD User Manual
Grundig Flat Panel Television 16 2830 T LW User Manual
Harbor Freight Tools Work Light 94795 User Manual
Havis Shields Telescope C PED Series User Manual
Heat Glo LifeStyle Indoor Fireplace 8000TVD User Manual
HP Hewlett Packard Laptop 355386 001 User Manual
Hummer Clock RD10 User Manual
Hypertec Mouse LIGHTNING 02 User Manual
Ikelite Digital Camera Olympus C 8080 User Manual